WM6.5 21501 kitchen

[Trident]

Originally Posted by Zeddicus

Look in post#1 for the manual download link...

Don't know how I missed that.
Yes I do. It's what I accuse my wife of all the time- I was skimming.
Thanks.

[gguruusa]

Originally Posted by conflipper

This error has been fixed, do a manual download of the new OEMS, and you should be good to go.

Updater has it too, now.

[boggsie]

Interesting ... I've got a little system try icon that flips the screen 90 degrees counter clockwise every time I touch it.

What might it be?
How do I get rid of it?

Best regards,
-boggsie

SelectionsVersion=.90.04
[BaseGroup]=GroupFile=Groups\BuildBases\WM6.1_192DPI_VGA_21042_0409.txt
[DeviceGroup]=GroupFile=Groups\DeviceBases\Victor_WM6.1.txt
GroupFile=[UserSetup]
ROMDeviceType=Victor
ROMRevType=All
ROMOSType=WM6.1
DeviceRUUType=Standard
DeviceCarrierType=Sprint
PagePoolSize=13
PagePoolType=Dynamic
SelectedBootSplashImage=480x640,TouchDiamond.jpg
SelectedSubSplashImage=480x640,TouchDiamond.jpg
SelectedAnimSplashImage=480x640,HTCAnimationStartup.gif
SelectedMainSplashImage=640x640,black61welcomehead96.png
fffffe77-5e38-477a-8130-49c5fb06a13f, True, Sprint

[indagroove]

Hey Guru-

I'm trying PPCKitchen as you suggested long ago, and am bringing my Bepe base over as you suggested previously, and everything works until the rom gets built, then there is an error in the rom folder (not finding nk.fat). It seems that I need to setup my rom folder differently. How should I do that? Thanks.

[conflipper]

Originally Posted by indagroove

Hey Guru-

I'm trying PPCKitchen as you suggested long ago, and am bringing my Bepe base over as you suggested previously, and everything works until the rom gets built, then there is an error in the rom folder (not finding nk.fat). It seems that I need to setup my rom folder differently. How should I do that? Thanks.

copy nk.fat from a .rar and place in rom folder and see if that works. It should be in Vicore Core, copy that and see if that works for you.

[indagroove]

Originally Posted by conflipper

copy nk.fat from a .rar and place in rom folder and see if that works. It should be in Vicore Core, copy that and see if that works for you.

Well, that solved the error, but I'm stuck at the TouchDiamond boot screen after flash. Everything is the same as past builds in calcu's kitchen. The only other thing that may be an issue is the carrier selection, since I had to choose on in the drop down menu, but there's also a carrier oem in my base.

EDIT: I swapped out the kitchen carrier folder for mine, and removed the carrier folder from oem's, but still no go.

[Trident]

Originally Posted by boggsie

Interesting ... I've got a little system try icon that flips the screen 90 degrees counter clockwise every time I touch it.

What might it be?
How do I get rid of it?

Best regards,
-boggsie

That is simply a rotate control that is created in a system tray when you don't have TF3D running.
There are reg edits to get rid of it if you don't want it. If they aren't in this forum, you'll find tons of discussion about them in WM6 threads in the Apache forums.

[boggsie]

Originally Posted by Trident

That is simply a rotate control that is created in a system tray when you don't have TF3D running.
There are reg edits to get rid of it if you don't want it. If they aren't in this forum, you'll find tons of discussion about them in WM6 threads in the Apache forums.

Great response !!! I have never used TF3D out of PPCKitchen and this is the first time I have seen it. It would seem that the PPCKitchen folks have cleaned out the reg entries that prevented it from being displayed before.

I really appreciate the information ... I am off to the apache forums !

Best regards,
-boggsie

[gguruusa]

Originally Posted by indagroove

Well, that solved the error, but I'm stuck at the TouchDiamond boot screen after flash. Everything is the same as past builds in calcu's kitchen.

That's invariably a xip problem....usually failure to have the right one built in.

The only other thing that may be an issue is the carrier selection, since I had to choose on in the drop down menu, but there's also a carrier oem in my base.

EDIT: I swapped out the kitchen carrier folder for mine, and removed the carrier folder from oem's, but still no go.

You should either use PPCk's carrier files. Is there some reason you prefer yours?

[indagroove]

Originally Posted by gguruusa

You should either use PPCk's carrier files. Is there some reason you prefer yours?

I've got some cabs that are installed on first boot with my config_operator.txt, and those files are in the carrier oem.