stuck in bootloader and won't boot to mobile os - Page 2

**twe90kid** · #11 (**permalink**) 10-09-2008, 11:23 AM

thanks to xda forums

Quote:

Originally Posted by SecureGSM

technically you need to do this:

You need Windows XP computer running ActiveSync. Vista is no good for the following procedure.

1. search for mtty.exe on this forum and download it:
2. connect you phone over USB cable to computer
3. in activesync settings : disable USB connectivity
4. launch mtty
5. in drop down list select USB port as connection option
6. mtty will connect to your Diamond
7. press :ENTER key
8. type as follows in command line:

set 16 0 0

9. press enter
10. disconnect USB cable and remove battery from your phone

you phone will boot normaly this time.

damn this was scary... took me about 6 hrs yesterday trying to figure out

**tobeychris** · #12 (**permalink**) 10-09-2008, 12:45 PM

Ah yes, cmonex mentioned that in the other thread I think... here

Were you able to boot?

**twe90kid** · #13 (**permalink**) 10-09-2008, 12:59 PM

yes but he stated "set 16 0" which doesn't work when i reboot the phone. i had to do "set 16 0 0" then remove the battery. the phone booted fine afterwards. everything fine and i was able to unlock the phone and flash Juicy's rom.

ghettofreeryder · #14 (**permalink**) 10-10-2008, 01:25 AM

you mean she?

Also, did you update to .net framework 3.5 before trying to unlcok, as per her instructions

**cmonex** · #15 (**permalink**) 10-12-2008, 06:40 PM

interesting, as "set 16 0" is the correct command.

but in your PM you stated you did "set 0 16", maybe you did a typo in mtty and that's why it didn't work.

daoom · #16 (**permalink**) 11-14-2008, 12:55 AM

I just has this problem and command "set 16 0" worked. I also found this thread on XDA with information on running mtty from Vista and it worked for me:

http://forum.xda-developers.com/showthread.php?t=291723
Big thanks to cmonex and all involved for the information

colloshes · #17 (**permalink**) 01-26-2009, 01:26 AM

1 Step - Copy And Paste Ssplmanual To Touch Pro Run The Ex. 2 Step - Run Hspl 37 From Computer. Step 3 The Install New Rom

**tobeychris** · #18 (**permalink**) 01-26-2009, 12:01 PM

1. You can't copy the SSPL Manual over to a phone that won't boot.
2. This is a Diamond Forum, there is no HSPL 0.37.
3. Can't apply when steps one and two don't work.
4. Your sentence structure is quite off, though "1 Step, 2 Step" does sound fun.