PPCGeeks - [ROM] [FINAL] [06.26.09] MightyROM4 w. OEM BASE Included

PPCGeeks (http://forum.ppcgeeks.com/index.php)

- CDMA Diamond Development (http://forum.ppcgeeks.com/forumdisplay.php?f=67)

- - [ROM] [FINAL] [06.26.09] MightyROM4 w. OEM BASE Included (http://forum.ppcgeeks.com/showthread.php?t=38999)

Re: [February 6th, 2009] M I G H T Y R O M 4.4.3 [SYS OS 20764 Build 20764] [UC]

completely dead battery maybe. Perhaps you might try letting it charge for 5 mins? Just an idea

Re: [February 6th, 2009] M I G H T Y R O M 4.4.3 [SYS OS 20764 Build 20764] [UC]

Quote:

Originally Posted by zoglog (Post 694781)

I mean it's not just the phone not turning on. When I plug in the cable the little white light spinning around the enter button doesn't even light up.

I think the sensor lights require some kind of driver used by the OS. You cant boot into WM, therefore, the lights will not work. Just a wild guess on my part. Goodluck to you.

Re: [February 6th, 2009] M I G H T Y R O M 4.4.3 [SYS OS 20764 Build 20764] [UC]

Quote:

Originally Posted by zoglog (Post 694781)

Well the main issue I think is that after the install I forgot to revert the power settings to turn the screen off after a set amount of time.

I went to sleep around 1am, the screen when I woke up was frozen @ around 6:30 (actual time was like 8:45)

@ that point I probably should have just did a hard reset, but I assumed it was just frozen and took the battery out and put it back in.

I mean it's not just the phone not turning on. When I plug in the cable the little white light spinning around the enter button doesn't even light up.

I've tried power + vol down + enter
and

power + vol down + enter + reset button all for about 1 mins and nothing seems to be happening. I've really screwed it up this time =(
but I guess hardware problems do happen. I sure hope it's so screwed up that they won't be able to see that it's been unlocked D:!

oh well, if nothing gets workin, I guess I can stop by the sprint store after work to get an exchange.

ok, try to hook it up to the charger for 5-10 minutes like msmith suggested. Then while powered off, try to enter bootloader, volume down + power to get back to the bootloader screen. Hold the volume down and power button until you see the bootloader screen. Then you can flash another rom or the shipped rom. For that matter let it charge for a while if you need to retrieve another rom and have it ready to go. Once in bootloader, you should be able to connect to active sync and flash away.

Re: [February 6th, 2009] M I G H T Y R O M 4.4.3 [SYS OS 20764 Build 20764] [UC]

this is missing the update profile & prl update from the stock roms if there was a update needed how would we do it???? also the radio seems to be the same i thought this was supposed to be based off of the leaked sprint rom?? If i'm wrong someone lead me in the right direction.

Re: [February 6th, 2009] M I G H T Y R O M 4.4.3 [SYS OS 20764 Build 20764] [UC]

I've already tried multiple well charged batteries from co-workers. Also i've had it plugged in the charger for over an hour now, still no response whatsoever.

It's like I can't even power the phone on at all, normally or to bootloader w/ power + vol down. no matter what buttons I press.

Re: [February 6th, 2009] M I G H T Y R O M 4.4.3 [SYS OS 20764 Build 20764] [UC]

Mighty's ROM's do not include the update PRL or update software, it never worked anyway.

In order to get the new sprint radio, you must first flash to the leaked sprint rom , then to Mighty's or just install Mighty's and flash the radio separately which is available in a sticky at the top of the page.

Re: [February 6th, 2009] M I G H T Y R O M 4.4.3 [SYS OS 20764 Build 20764] [UC]

Quote:

Originally Posted by blackrain (Post 694878)

Update profile and prl updates would be included in certain custom roms that are Sprint specific. MIghty's rom is sprint capatible but would not include these. The radio rom is only including on the shipped roms from Sprint and the Leaked sprint rom. Even though it's based off the leaked rom, it does not include a radio. But you can flash this seperately. Read the instructions in the sticky on the first page for radio flashing. Good luck.

Re: [February 6th, 2009] M I G H T Y R O M 4.4.3 [SYS OS 20764 Build 20764] [UC]

Wow, there is an echo in here....

Re: [February 6th, 2009] M I G H T Y R O M 4.4.3 [SYS OS 20764 Build 20764] [UC]

i hate this mighty rom.

so many noticeable bugs with every release.

things i've encountered:
-input setting goes haywire and requires a restart just to go from compact to full qwerty.
-ring tones not working at all............ this is a phone.............. the most important thing doesn't work LOL

JUICY COME BACK!!!!!!!!

Re: [February 6th, 2009] M I G H T Y R O M 4.4.3 [SYS OS 20764 Build 20764] [UC]

Bad place to post attacks on somebody that makes the best ROMs people have ever used. A good suggestion would be for you to go back to the Beginner Tutorials where it is listed how to properly flash a ROM and then follow up with a hard reset. Best Wishes!