Re: NAND boot testing. Test 5: SOUND!!!!/Test 7: Single NBH/Serialno/tilt2 fix
 

Flashed over and tested it for you, but there was no problem like this. I booted up, then called and the mic worked without any key having to be pressed. Then I reset the phone, and called again, the mic worked fine again, then tried the speakerphone and the mic also worked on that without having to press the volume key at all. Hope this helps you.

Re: NAND boot testing. Test 5: SOUND!!!!/Test 7: Single NBH/Serialno/tilt2 fix
 

Thanks.. Before i patch up USB, can you test what happens if you plug into the AC charger and not the USB charger? I'm not sure if android recognised it before.

I completely forgot to test this before and i'm already patched up.

Re: NAND boot testing. Test 5: SOUND!!!!/Test 7: Single NBH/Serialno/tilt2 fix
 

I can test it for ya... I'm just wondering should I use the zImage/modules from the first post, or from the new 'final' build...?

Re: NAND boot testing. Test 5: SOUND!!!!/Test 7: Single NBH/Serialno/tilt2 fix
 

which ever is the last one wozzer posted .. thats the last official one.

Re: NAND boot testing. Test 5: SOUND!!!!/Test 7: Single NBH/Serialno/tilt2 fix
 

Ah ok. I'll flash & try in a few.

Well it does the same thing it always does... shows it's charging for a few seconds then goes to full battery/completely charged. I'm assuming it's working the same as the haret versions - it's really charging, it just doesn't say that it is ;)

Re: NAND boot testing. Test 5: SOUND!!!!/Test 7: Single NBH/Serialno/tilt2 fix
 

Thats fine, thats what i needed to know. Thanks.

Re: NAND boot testing. Test 5: SOUND!!!!/Test 7: Single NBH/Serialno/tilt2 fix
 

Wozz: just finished patching usb. it works good for me but im still unsure of the ac charger portion. Next patch will hopefully be a better battery meter. If you have time this weekend check it out and let me know ur input.

Re: NAND boot testing. Test 5: SOUND!!!!/Test 7: Single NBH/Serialno/tilt2 fix
 

You've got some rabid testers available :p I keep seeing people having that issue with incoming calls tho, so perhaps the TOPA is affected and not the RHOD...

Re: NAND boot testing. Test 5: SOUND!!!!/Test 7: Single NBH/Serialno/tilt2 fix
 

is there any way to get the first post updated to make life a lot easer..i am thinking we are more like on test 8 now and to making it more easy for knowing what files to download and what to do

Re: NAND boot testing. Test 5: SOUND!!!!/Test 7: Single NBH/Serialno/tilt2 fix
 

Wozz probably could do some cleanup on the first&second post, but I don't think we're on test 8 yet - he'll tell us when he posts the stuff for the next stage ;)

Keep in mind in the scope of this project, this nbh testing is very early. Technically this is so early it's not really a flash - Android is still running off of the SD, it's not actually running Android on the NAND.

So be patient, when it's gotten more testing & tuning, and ready for the masses I'm sure the explanation of how it works will be a lot easier. Heck, I'm hoping with this testing we'll make it to a full NAND, but that still seems like it's going to take quite a bit more work...