PPCGeeks
Page 47 of 347 « First 374546 47 48495797147 Last »
Show 40 post(s) from this thread on one page

PPCGeeks (http://forum.ppcgeeks.com/index.php)
-   Android On TP2 (http://forum.ppcgeeks.com/forumdisplay.php?f=179)
-   -   [CAB] GSM&CDMA Project Android Port and Startup Utility [01/23] FRX04 Reference! (http://forum.ppcgeeks.com/showthread.php?t=114400)

InvincibleLiving 06-30-2010 03:23 PM
Re: [CAB] GSM&CDMA Project Android Port and Startup Utility [6/23] EXT2 BUILD ADDED!
 
Quote:
Originally Posted by Reefermattness (Post 1845954)
If you know how to fix it, then do it. Its considerably easier to port a new file system than it is to decompile windows drivers and read them to see what they do. If you can read code, reverse engineer, or hardware debug then I will point you in the direction to help, otherwise comments like these are unnecessary.
+1 Reef! I for one will take all the breakthrus as they come since that's about all I can do. Thanks for your time and effort in driving this process on the CDMA side! :king:

KoolFrank87 06-30-2010 03:25 PM
Re: [CAB] GSM&CDMA Project Android Port and Startup Utility [6/23] EXT2 BUILD ADDED!
 
Quote:
Originally Posted by Reefermattness (Post 1845889)
Seems to be something with the new APN list, but Im not completely sure. They will work on it tho. :) Even GSM is a bit buggy it will do things like leave out some of the APN settings.

Thanks for the reply boss, keep us informed! :laughing6:

KoolFrank87 06-30-2010 03:36 PM
Re: [CAB] GSM&CDMA Project Android Port and Startup Utility [6/23] EXT2 BUILD ADDED!
 
Quote:
Originally Posted by InvincibleLiving (Post 1845957)
I got CDMA data working by first doing the APN trick (search this thread) then having the device begin scanning for the network until it times out, hitting the back button, then scanning again. Once you scan the second time it should pick up the signal within 5 seconds or so and then you're good to go. Again, all this info is found in the last 2-3 pages prior to this post.
I found that post and it is also on the Wiki on the main project andriod site but it didnt help me. I am verizon so im not sure if it makes a difference. I may just blow away the build, start over and see what kinda trouble i can cause from scratch. Ill keep you posted if it works for my verizon phone.

InvincibleLiving 06-30-2010 03:43 PM
Re: [CAB] GSM&CDMA Project Android Port and Startup Utility [6/23] EXT2 BUILD ADDED!
 
Quote:
Originally Posted by KoolFrank87 (Post 1845994)
I found that post and it is also on the Wiki on the main project andriod site but it didnt help me. I am verizon so im not sure if it makes a difference. I may just blow away the build, start over and see what kinda trouble i can cause from scratch. Ill keep you posted if it works for my verizon phone.
Keep at it, I've seen posts of other VZ users having success.

I took me the better part of the first day to figure it out even though it was simple once I saw what I was doing wrong. The best part is that you only have to do it right that one time and then the settings persist for each boot after that (so far in my case)

Trying to help a fellow virginian:laughing6:

KoolFrank87 06-30-2010 03:51 PM
Re: [CAB] GSM&CDMA Project Android Port and Startup Utility [6/23] EXT2 BUILD ADDED!
 
Quote:
Originally Posted by InvincibleLiving (Post 1846009)
Keep at it, I've seen posts of other VZ users having success.

I took me the better part of the first day to figure it out even though it was simple once I saw what I was doing wrong. The best part is that you only have to do it right that one time and then the settings persist for each boot after that (so far in my case)

Trying to help a fellow virginian:laughing6:

Yea i gotta represent Verizon here in the big VA. Ill make sure to make a nice little guide or something if/when I figure it out. :laughing3:

da1stprince 06-30-2010 06:37 PM
Re: [CAB] GSM&CDMA Project Android Port and Startup Utility [6/23] EXT2 BUILD ADDED!
 
Quote:
Originally Posted by da1stprince (Post 1845579)
could i just start the android utility and hit update to get the latest and greatest? or do i have to clear what i have on my storage card and install new cab?
anyone??

reekotubbs 06-30-2010 07:49 PM
Re: [CAB] GSM&CDMA Project Android Port and Startup Utility [6/23] EXT2 BUILD ADDED!
 
Quote:
Originally Posted by Reefermattness (Post 1845954)
If you know how to fix it, then do it. Its considerably easier to port a new file system than it is to decompile windows drivers and read them to see what they do. If you can read code, reverse engineer, or hardware debug then I will point you in the direction to help, otherwise comments like these are unnecessary.
hey reefer i can code, point me in the right direction.
thanks

YnYng 06-30-2010 08:10 PM
Re: [CAB] GSM&CDMA Project Android Port and Startup Utility [6/23] EXT2 BUILD ADDED!
 
Quote:
Originally Posted by da1stprince (Post 1846242)
anyone??

you can jus hit update and it will do everything for you. :roll:

Reefermattness 06-30-2010 08:56 PM
Re: [CAB] GSM&CDMA Project Android Port and Startup Utility [6/23] EXT2 BUILD ADDED!
 
Quote:
Originally Posted by da1stprince (Post 1846242)
anyone??
Depends on what you want, its not gonna update the system file for you (yet). So if you want a new build, you have to reinstall, if you just want your rootfs, zimage, or initrd updated, then you use the tool.

da1stprince 06-30-2010 09:18 PM
Re: [CAB] GSM&CDMA Project Android Port and Startup Utility [6/23] EXT2 BUILD ADDED!
 
thanx so much!


All times are GMT -4. The time now is 01:56 PM.
Page 47 of 347 « First 374546 47 48495797147 Last »
Show 40 post(s) from this thread on one page

Powered by vBulletin® ©2000 - 2025, Jelsoft Enterprises Ltd.
©2012 - PPCGeeks.com


Content Relevant URLs by vBSEO 3.6.0