PPCGeeks
Page 43 of 347 « First 334142 43 44455393143 Last »
Show 40 post(s) from this thread on one page

PPCGeeks (http://forum.ppcgeeks.com/index.php)
-   Android On TP2 (http://forum.ppcgeeks.com/forumdisplay.php?f=179)
-   -   [CAB] GSM&CDMA Project Android Port and Startup Utility [01/23] FRX04 Reference! (http://forum.ppcgeeks.com/showthread.php?t=114400)

emb Driver 06-26-2010 09:12 PM
Re: [CAB] GSM&CDMA Project Android Port and Startup Utility [6/23] EXT2 BUILD ADDED!
 
Quote:
Originally Posted by PropagandaX (Post 1838438)
I have to say this latest build 6/23 is pretty good. Been about a month since I have run it. Had to manual force the data to work using the apn trick. Battery use is moderate, phone runs warm. Charging seems to work (heat?). Screen seems to turn off ok (still set to auto in WM) completely. Market works. Every app I have downloaded works so far. Gps works good, google maps, etc. Screen keyboard works good but seems a little shaky, auto Hovers around 68 mb ram with task manager used. Getting close....
I agree that this build is good, but I can't get Air Control to launch, or get Urbanspoon to install properly. Anyone else have this issue?

YnYng 06-26-2010 11:45 PM
Re: [CAB] GSM&CDMA Project Android Port and Startup Utility [6/23] EXT2 BUILD ADDED!
 
dude same, urbanspoon refuses to install even though it ppl reported it working in another thread

PropagandaX 06-27-2010 12:32 AM
Re: [CAB] GSM&CDMA Project Android Port and Startup Utility [6/23] EXT2 BUILD ADDED!
 
Quote:
Originally Posted by defiantone (Post 1838673)
-------------------\
I can't get the 6/23 version to give me data.. back to 6/16...
It took me a few minutes to get it working right, had to use the trick mentioned a few posts back. Once i did it I have to back out and get back in the network setting then boom it connected.

t0mmyr 06-27-2010 01:36 AM
Re: [CAB] GSM&CDMA Project Android Port and Startup Utility [6/23] EXT2 BUILD ADDED!
 
so i tried 6/16 and 6/23 builds recently and my 3g data wont connect anymore, i have my sim card out, is there something different i need to do to get internet working via cellular? it worked well with an older cab, i think i was running 6/1 before

byrnsey88 06-27-2010 01:47 AM
Re: [CAB] GSM&CDMA Project Android Port and Startup Utility [6/23] EXT2 BUILD ADDED!
 
I am having trouble making calls ever since i updates to the latest rootfs. Nobody can hear me from i am assuming my mic is not working, but I can hear them fine and they sound a little louder then normal.

vzihome 06-27-2010 05:43 AM
Re: [CAB] GSM&CDMA Project Android Port and Startup Utility [6/23] EXT2 BUILD ADDED!
 
Quote:
Originally Posted by t0mmyr (Post 1839737)
so i tried 6/16 and 6/23 builds recently and my 3g data wont connect anymore, i have my sim card out, is there something different i need to do to get internet working via cellular? it worked well with an older cab, i think i was running 6/1 before
Need to create a fake APN, name it whatever, server internet.com, save it,, activate it, get out, and surf the net. better instructions were posted some posts back.

InvincibleLiving 06-27-2010 12:16 PM
Re: [CAB] GSM&CDMA Project Android Port and Startup Utility [6/23] EXT2 BUILD ADDED!
 
I did the APN trick and it gave me ability to surf web, but when I try to access marketplace it says I have no data connection... what should I try next?

defiantone 06-27-2010 12:24 PM
Re: [CAB] GSM&CDMA Project Android Port and Startup Utility [6/23] EXT2 BUILD ADDED!
 
Quote:
Originally Posted by PropagandaX (Post 1839686)
It took me a few minutes to get it working right, had to use the trick mentioned a few posts back. Once i did it I have to back out and get back in the network setting then boom it connected.
------
thanks and you've been thanked..
however, I figured out what I was doing wrong. I had a brainfart... When I went to APN..i thought i should see the screen that comes up when you choose new or add from the settings.. Once I added it...all is well..
felt real stupid for a minute.

InvincibleLiving 06-27-2010 12:51 PM
Re: [CAB] GSM&CDMA Project Android Port and Startup Utility [6/23] EXT2 BUILD ADDED!
 
Quote:
Originally Posted by defiantone (Post 1840029)
------
thanks and you've been thanked..
however, I figured out what I was doing wrong. I had a brainfart... When I went to APN..i thought i should see the screen that comes up when you choose new or add from the settings.. Once I added it...all is well..
felt real stupid for a minute.
Can you get into Marketplace now? I still get a 'no data' msg even after doing the APN...

demonlordoftheround 06-27-2010 01:21 PM
Wirelessly posted (Mozilla/5.0 (Linux; U; Android 2.1-update1; en-us; AOSP on XDANDROID MSM Build/ECLAIR) AppleWebKit/530.17 (KHTML, like Gecko) Version/4.0 Mobile Safari/530.17)

Naut, sometimes Marketplace is down and gives a network error. What build you using? The Sense build is kind of buggy with Marketplace.


All times are GMT -4. The time now is 10:57 AM.
Page 43 of 347 « First 334142 43 44455393143 Last »
Show 40 post(s) from this thread on one page

Powered by vBulletin® ©2000 - 2025, Jelsoft Enterprises Ltd.
©2012 - PPCGeeks.com


Content Relevant URLs by vBSEO 3.6.0