PPCGeeks
Page 110 of 347 « First 1060100108109 110 111112120160210 Last »
Show 40 post(s) from this thread on one page

PPCGeeks (http://forum.ppcgeeks.com/index.php)
-   Android On TP2 (http://forum.ppcgeeks.com/forumdisplay.php?f=179)
-   -   [CAB] GSM&CDMA Project Android Port and Startup Utility [01/23] FRX04 Reference! (http://forum.ppcgeeks.com/showthread.php?t=114400)

InvincibleLiving 08-26-2010 04:39 PM
Re: [CAB] GSM&CDMA Project Android Port and Startup Utility [8/26] SOUND IS FIXED!
 
Quote:
Originally Posted by Reefermattness (Post 1924883)
By the way guys, give credit where it is due. Yes, the guys who got sound working albeit obviously smart, were not alone. They used a lot of other peoples work to get to the point where they were really only looking at a very small area that needed fixing. Without peoples previous work like Phh, or WisTilt2's insight, ACL and Wozzer and their crew banging away at it over and over and over, this never would have happened. Make sure you guys understand not just a couple people fixed this issue.
Reef you're absolutely right there are alot of unsung heroes that have made both minor and major contributions to the progress we've seen in this project... just don't forget to name yourself, you've been a champion for those of us who were once left out on the CDMA side! Thanks for your dedication and skill!

webctbill 08-26-2010 05:22 PM
Re: [CAB] GSM&CDMA Project Android Port and Startup Utility [8/26] SOUND IS FIXED!
 
Quote:
Originally Posted by xboxp (Post 1924853)
does your speaker have static noise when there's not audio playing?
I showed it to my co worker and noticed that there was a his, but when I hit the volume button it went away.


There is a noticeable pop when you enter some type of sound app.

Pop or no Pop this Rocks.

LOL... POP ROCKS

Bill

Jok3sta 08-26-2010 05:26 PM
Re: [CAB] GSM&CDMA Project Android Port and Startup Utility [8/26] SOUND IS FIXED!
 
i just did a fresh install of this and im stuck in an endless loop of the xdandroid boot animation

WhiteBlazer01 08-26-2010 05:42 PM
Re: [CAB] GSM&CDMA Project Android Port and Startup Utility [8/26] SOUND IS FIXED!
 
Oh happy day!! Going to install shortly...

Masterface7 08-26-2010 05:50 PM
Re: [CAB] GSM&CDMA Project Android Port and Startup Utility [8/26] SOUND IS FIXED!
 
Quote:
Originally Posted by xboxp (Post 1924853)
does your speaker have static noise when there's not audio playing?
I do on my sprint tp2 as well. Sound does work though I tested with a mp3 Plugging in headphones doesn't do anything though sound and hiss/pop still come through the back speaker regardless of my plugging in headphones. I have changed ringer volume and media volume and hiss/pop is still there. I am using a fat32 card I am gonna try ext2 maybe tonight or this weekend, although I never have before.
Now if only I can get I heart radio to work.

emtaboy 08-26-2010 06:25 PM
Re: [CAB] GSM&CDMA Project Android Port and Startup Utility [8/26] SOUND IS FIXED!
 
Installed on my Sprint TP2. Hissing/static begins during Android bootup and continues when fully booted. Pressing volume/calling the phone will stop it momentarily but it always begins again. Tried changing startup.txt cpu frequency setting back to 500 (or stock) but that made no difference. Also, when on a call, the speaker phone does not output sound and if you put it in speaker phone mode this will cause the sound to mute on the phone.

Only report this to help those who have come this far diagnose what may be wrong, if they care to do so. I remain appreciative of everyone's efforts!

one80oneday 08-26-2010 07:00 PM
Re: [CAB] GSM&CDMA Project Android Port and Startup Utility [8/26] SOUND IS FIXED!
 
Kernel update: Add workaround not to have rhod's speaker always on. Still need userspace's fix: In linux-on-qualco... http://bit.ly/aNl8AR

xboxp 08-26-2010 07:04 PM
Re: [CAB] GSM&CDMA Project Android Port and Startup Utility [8/26] SOUND IS FIXED!
 
Quote:
Originally Posted by emtaboy (Post 1925086)
Installed on my Sprint TP2. Hissing/static begins during Android bootup and continues when fully booted. Pressing volume/calling the phone will stop it momentarily but it always begins again. Tried changing startup.txt cpu frequency setting back to 500 (or stock) but that made no difference. Also, when on a call, the speaker phone does not output sound and if you put it in speaker phone mode this will cause the sound to mute on the phone.

Only report this to help those who have come this far diagnose what may be wrong, if they care to do so. I remain appreciative of everyone's efforts!
hmmm that's odd. When in a phone conversation, i'm able to use speaker phone w/o any problem.

steveholtam 08-26-2010 07:20 PM
Re: [CAB] GSM&CDMA Project Android Port and Startup Utility [8/26] SOUND IS FIXED!
 
I just installed the new cab over the prior 8/18 cab and all my custom user settings remained intact. Is this normal operating procedure or did I get lucky?

2phonejones 08-26-2010 07:21 PM
Re: [CAB] GSM&CDMA Project Android Port and Startup Utility [8/26] SOUND IS FIXED!
 
whoooooooooooooooooooooooooooooooooooooooooooooooo oooooooooooooooooooooooooooooooooooooooooooooooooo oooooooooooooooooooooooooooooooooooooooooooooooooo oooooooooooooooooooooooooooooooooooooooooooooooooo oooooooooooooooooooooooooooooooooooooooooooooooo i thought i was dreaming yassssssssssssssssssssssssssssssssssssssssssssssss ssssssssssssssssssssssssssssssssssssssssssssss


All times are GMT -4. The time now is 07:54 AM.
Page 110 of 347 « First 1060100108109 110 111112120160210 Last »
Show 40 post(s) from this thread on one page

Powered by vBulletin® ©2000 - 2025, Jelsoft Enterprises Ltd.
©2012 - PPCGeeks.com


Content Relevant URLs by vBSEO 3.6.0