Re: [TESTING] XDAndroid GBX0C 2.3.7 Build
 

Which kernel are you using karimkahale?
If it is 3.3.6 or newer you must install an app in android to control the cpu frequency (I use No Frills CPU Control, which is free on the market).
If you are using 2.6.39, 3.0, 3.2, or up to 3.3.4 then you need to use the startup command:
acpuclock-arm11.oc_freq_khz=xxxxxx
If you are still using the kernel bundled with GBX0C (2.6.27) use this startup command:
acpuclock.oc_freq_khz=xxxxxx
Of course those lines need to be placed in startup.txt within the quotes after: set cmdline "here!".

Re: [TESTING] XDAndroid GBX0C 2.3.7 Build
 

There is one problem on my rhodium 400, being used in GSM mode, once the phone loses signal, the phone goes in "searching for networks" and does not re-acquire the signal. Only re-boot will fix that.

Is there any fix for this?

Re: [TESTING] XDAndroid GBX0C 2.3.7 Build
 

is there a way to fix the camera on my htc tp2 using gbx0c ?

Re: [TESTING] XDAndroid GBX0C 2.3.7 Build
 

i got force close with many app i install, hoq can i fix it :(
tks

Re: [TESTING] XDAndroid GBX0C 2.3.7 Build
 

You can try cycling the radio - airplane mode on/off. Sometimes it fixes it, sometimes it doesn't...

You have a RHOD400? Cam should work fine. What kernels have you tried? Did you pull any logs? Is it the camcorder or camera.

What app? Logs?

Re: [TESTING] XDAndroid GBX0C 2.3.7 Build
 

tks for answer
Simsimi :-({|= task killer, ram manager,... and i got another problem too, i can't import sim contacts to phone (when using import/export from dialer) and if i used sim2contact, i got a notice "can't excess to sim card".
tks

Re: [TESTING] XDAndroid GBX0C 2.3.7 Build
 

Don't use task killers/RAM managers. See my speed improvements thread.

Can't access SIM card, can't really help you. Use Google to import contacts perhaps...?

Either way you still haven't posted any logs. So you're on your own.

Re: [TESTING] XDAndroid GBX0C 2.3.7 Build
 

The camcorder and the camera are both not working.I am using the kernel bundled with the gbx0c.

Re: [TESTING] XDAndroid GBX0C 2.3.7 Build
 

Karim, you should update to the newest kernel from here:

Download the newest package 3.3.8 and unzip the files to the root of your SD Card, overwriting zimage then reboot.

I am pretty sure that there was a camera fix added around version 3.3.4 or something. The newest kernel is very stable and responsive.

Re: [TESTING] XDAndroid GBX0C 2.3.7 Build
 

i downloaded the newest package and replaced the old modules and zimage by the new ones.i tried first to run haret but it showed at the end an error :"can't access root..." though it was on the root of my device.then i formatted the sd card, deleted the pervious data.img and run haret.i got the same error.why is that happenning?