Re: [TESTING] - NAND OMGB (1.2.3)
 

Allow me to make some slight modifications. dmesg looks fine.

adb logcat -v time -d > app.log
adb logcat -b radio -v time -d > radio.log

The -d will stop logcat when it's done. I also added spaces, I can't remember if they're required or not.

Re: [TESTING] - NAND OMGB (1.2.3)
 

OK, after 2 times reboot with my terrible USB cable.
I got several logs for debugging MIC issues. Hope it's helpful for you.

Re: [TESTING] - NAND OMGB (1.2.3)
 

hey did you try the light sensor and prox ? this dmesg is really short and doesnt show much activity when it comes to LS and prox

There is something wrong with your setup.

12-15 01:01:47.530 E/lights ( 122): write_int failed to open /dbgfs/micropklt_dbg/auto_backlight

This does not exist on my code. Did you modify the sensors ?

EDIT: I see, you are using haret libs. I'm going to let you know this only once. I don't support hacked setups. It makes it impossible to troubleshoot and delays progress. So if you want to help, you have to use what we put out. Plain and simple. Or else your bugs will be mistaken for something else and we end up loosing time.

So please, fix your setup or wait until a final release.

Re: [TESTING] - NAND OMGB (1.2.3)
 

I tried set the parameter ro.telephony.default_network on value 1 and:
1) using task 29 clean my phone (Extra Lite Energy Rom + FRX7.1 before - it's my daily phone)
2) flash rhodimg.nbh from sdcard
3) flash recovery.img using fastboot
4) install update using recovery from zip with build.prop/ro.telephony.default_network = 1 inside
5) boot into OMGB
6) reboot to recovery and install gapps
7) boot back OMGB
and ....
still no signal ](*,)
Logs are probably useless, correct?

Re: [TESTING] - NAND OMGB (1.2.3)
 

I don't get why some are working great and others not at all.

I would think the APN configuration would only apply to data/MMS, but have you configured an APN for your provider?

Re: [TESTING] - NAND OMGB (1.2.3)
 

Yes, my APNs are configurated automatically and correct, but of course - no data :-) Automatic time providing network is also functional.
Now I tried SIM card from my wife, she using Vodafone, but same result - APNs were configurated, timesynchro OK, but no signal :(

Re: [TESTING] - NAND OMGB (1.2.3)
 

i have no gsm service so i cant diagnose of fix this. I guess we will need to compare the rhod100 successful radio logs vs the unsuccessful logs.

Re: [TESTING] - NAND OMGB (1.2.3)
 

Understand, it's hard to find the issue. May I send some actuall logs or have you any older from me posted on XDA? :-) Reference logs with success connect to network could be from Starling100, correct?

Re: [TESTING] - NAND OMGB (1.2.3)
 

One finding: As I already wrote I have no signal on my Rhod100, but some registration to network is done (autoconfig APN and so on). Now I'm found during my play with OMGB without signal I have incomming call from my wife (oops :-)). In her phone she heared that my phone is inaccessibilited. In our country operator (provider) always sending SMS about missed call if the called phone is off (power off/out of signal). In this case no SMS about missed call has been send. It probably means, that my operator think I'm online, even if I'm not. May be help you ...

Try switching into airplane then reboot(when switching to airplane mode it doesn't actually switch until you restart) then after you restart switch back to airplane off reboot (same as above) it worked for me when I was having issues don't know if its related I'm on sprint rhod400

Sent from my Touch Pro 2 using Tapatalk