PPCGeeks
Page 21 of 163 « First 111920 21 22233171121 Last »
Show 40 post(s) from this thread on one page

PPCGeeks (http://forum.ppcgeeks.com/index.php)
-   Android On TP2 Development (http://forum.ppcgeeks.com/forumdisplay.php?f=319)
-   -   [TESTING] - NAND OMGB (1.2.3) (http://forum.ppcgeeks.com/showthread.php?t=147260)

[ACL] 11-10-2011 01:39 AM
Re: [TESTING] - OMGB - 1.2.2{2.3.5} - 400/500 Only
 
Quote:
Originally Posted by trevoroni (Post 2154921)
Ya I thought it was weird. Wiping everything and re-flashing OMGB from recovery seems to have fixed everything. I didn't have to reflash recovery first either.
Yeah there is a file /data/ts-calibration that is saved in data that holds the values. Now if you wipe this file, next time you boot it will be recreated with defaults so next time just wipe that bad boy and u will be fine.

However now you see my reason why we need a calib app so bad. I was looking at the ones arrggg posted but so far no winners. Worse case i wonder if i can extend my recovery to use the old calib app. This however would never make it to cwm :-\

trevoroni 11-10-2011 10:52 AM
Re: [TESTING] - OMGB - 1.2.2{2.3.5} - 400/500 Only
 
Quote:
Originally Posted by [ACL] (Post 2154964)
Yeah there is a file /data/ts-calibration that is saved in data that holds the values. Now if you wipe this file, next time you boot it will be recreated with defaults so next time just wipe that bad boy and u will be fine.

However now you see my reason why we need a calib app so bad. I was looking at the ones arrggg posted but so far no winners. Worse case i wonder if i can extend my recovery to use the old calib app. This however would never make it to cwm :-\
I was wondering if this file existed like it did in the SD card builds. Thanks for the tip, hopefully there won't be a next time but if there is I'll try that first.

I did a little looking into a calibration app this morning and there aren't many resistive touchscreen Android phones out there, and if they are the screen resolution is really low. I think we might have better luck looking for something for one of those cheap Android no name tablets.

I found this for a Pandigital Planet, it has a resistive 800x600 screen so it might be help.
Touchscreen Calibration -- NEED TESTERS!! - SlateDroid.com
I'd test it for our phone right now but I'm at work.

anish88 11-10-2011 01:06 PM
Re: [TESTING] - OMGB - 1.2.2{2.3.5} - 400/500 Only
 
Do the keyboard lights work though? I know it says button lights work based on light sensor but does that include keyboard too?

[ACL] 11-10-2011 01:20 PM
Re: [TESTING] - OMGB - 1.2.2{2.3.5} - 400/500 Only
 
Quote:
Originally Posted by trevoroni (Post 2154994)
I was wondering if this file existed like it did in the SD card builds. Thanks for the tip, hopefully there won't be a next time but if there is I'll try that first.

I did a little looking into a calibration app this morning and there aren't many resistive touchscreen Android phones out there, and if they are the screen resolution is really low. I think we might have better luck looking for something for one of those cheap Android no name tablets.

I found this for a Pandigital Planet, it has a resistive 800x600 screen so it might be help.
Touchscreen Calibration -- NEED TESTERS!! - SlateDroid.com
I'd test it for our phone right now but I'm at work.
Originally i wanted to remove it but i doubt anyone will want to flash back to winmo to recalib. So that file is something we can write to so our settings load at all times. And if it gets corrupt, just relaib or wipe data.

Wish android had a default ts calib app :???:

anyways i was tempted to upload the latest omgb but i just got the gsm phone so i'll wait until the weekend to include whatever code we have for gps.

arrrghhh 11-10-2011 02:54 PM
Re: [TESTING] - OMGB - 1.2.2{2.3.5} - 400/500 Only
 
Quote:
Originally Posted by anish88 (Post 2155024)
Do the keyboard lights work though? I know it says button lights work based on light sensor but does that include keyboard too?
Keyboard lights work fine.

anish88 11-10-2011 07:10 PM
Re: [TESTING] - OMGB - 1.2.2{2.3.5} - 400/500 Only
 
i seem to be stuck with the same problem starfox was having with getting Windows to recognize the phone after flashing RHODIMG.nbh. it can not find the right driver. can some point me to where i can find it?

[ACL] 11-10-2011 07:36 PM
Re: [TESTING] - OMGB - 1.2.2{2.3.5} - 400/500 Only
 
Quote:
Originally Posted by anish88 (Post 2155100)
i seem to be stuck with the same problem starfox was having with getting Windows to recognize the phone after flashing RHODIMG.nbh. it can not find the right driver. can some point me to where i can find it?
do a search online how to get fastbot wring on windows. I'm on linux so I have no idea about no drivers :(

Also read the nand how to on the project page. It updated it today and it my help you.

vzihome 11-10-2011 07:37 PM
I had the same problem Ill write a quick guide to get you guys going.

Sent from my ACL powered TP2 using Tapatalk

lovingHDTV 11-10-2011 08:23 PM
Re: [TESTING] - OMGB - 1.2.2{2.3.5} - 400/500 Only
 
Step 2 of the install it says to put the recovery.img in the Fastboot folder.

Is this a folder I create on the sdcard? my pc?

thanks,
dave

arrrghhh 11-10-2011 08:27 PM
Re: [TESTING] - OMGB - 1.2.2{2.3.5} - 400/500 Only
 
Quote:
Originally Posted by lovingHDTV (Post 2155117)
Step 2 of the install it says to put the recovery.img in the Fastboot folder.

Is this a folder I create on the sdcard? my pc?

thanks,
dave
PC.....

Edit - you're proving my point I just made in the other thread. This is for testing, it's not ready for end-users.


All times are GMT -4. The time now is 07:19 AM.
Page 21 of 163 « First 111920 21 22233171121 Last »
Show 40 post(s) from this thread on one page

Powered by vBulletin® ©2000 - 2024, Jelsoft Enterprises Ltd.
©2012 - PPCGeeks.com


Content Relevant URLs by vBSEO 3.6.0