[BUILD] **Complete GingerBread Bundle!!** GBX0A - Alpha! Camera!

[Sting32]

I have one nagging problem I cannot figure out, I had a stable version installed (the xdandroid, released mid January... but I finally decided to try newer and destroyed that version... No matter what version I try now even this GBX04a, every time I open the browser, it flashes, then crashes back to windows. if I stop the page from loading all the way (on screen about you see about 5mm left to load at google home page on that loading bar) it "can" live, but next link you open will flash really bright then back to windows. I will try right now to change home screen I guess?

Could this be becuase I use the wrong startup? on that 1st one, from XDAndroid I thought I was instructed to use rhod500 for my CDMA Touch Pro, on verizon, so I assumed that woudlnt change, but now I doubt any information I thought I knew.

I have gone back to every version except the original pre packed XDA frx02 version, and they all act the same? what am I doing wrong? However one thing I been consistant on, I unzip to andboot folder, then erase card on phone, then copy this over and edit the same rhod500 folders, startup.txt giving the rel_path=andboot

DO I need to make it be in GBX04A folder instead of andboot? or something else i do/did stoopidly? thanks

thanks.

[ffkip911]

Originally Posted by Sting32

I have one nagging problem I cannot figure out, I had a stable version installed (the xdandroid, released mid January... but I finally decided to try newer and destroyed that version... No matter what version I try now even this GBX04a, every time I open the browser, it flashes, then crashes back to windows. if I stop the page from loading all the way (on screen about you see about 5mm left to load at google home page on that loading bar) it "can" live, but next link you open will flash really bright then back to windows. I will try right now to change home screen I guess?

Could this be becuase I use the wrong startup? on that 1st one, from XDAndroid I thought I was instructed to use rhod500 for my CDMA Touch Pro, on verizon, so I assumed that woudlnt change, but now I doubt any information I thought I knew.

I have gone back to every version except the original pre packed XDA frx02 version, and they all act the same? what am I doing wrong? However one thing I been consistant on, I unzip to andboot folder, then erase card on phone, then copy this over and edit the same rhod500 folders, startup.txt giving the rel_path=andboot

DO I need to make it be in GBX04A folder instead of andboot? or something else i do/did stoopidly? thanks

thanks.

yep, rel_path=gbx04a

EDIT: sorry, just re-read the question again. After 7zip you have a folder labeled "gbx04a" within that you are pulling your startup text from "startup" folder. the startup.txt will probably be labeled rel_path=gbx04a....if this is the case, copy and past the unzipped folder labled gbx04a onto the root of your card. just make sure your correct startup.txt is in that folder and you should be good

just checked---when it's unzipped it's called froyo x ginger cdma---once unzipped rename the folder gbx04a and make sure the startup.txt is labeled the same (for ease of use, I renamed my folder "ginger" and made my startup text rel_path=ginger)

[Sting32]

Originally Posted by Sting32

I have one nagging problem I cannot figure out, I had a stable version installed (the xdandroid, released mid January... but I finally decided to try newer and destroyed that version... No matter what version I try now even this GBX04a, every time I open the browser, it flashes, then crashes back to windows. if I stop the page from loading all the way (on screen about you see about 5mm left to load at google home page on that loading bar) it "can" live, but next link you open will flash really bright then back to windows. I will try right now to change home screen I guess?

Could this be becuase I use the wrong startup? on that 1st one, from XDAndroid I thought I was instructed to use rhod500 for my CDMA Touch Pro, on verizon, so I assumed that woudlnt change, but now I doubt any information I thought I knew.

I have gone back to every version except the original pre packed XDA frx02 version, and they all act the same? what am I doing wrong? However one thing I been consistant on, I unzip to andboot folder, then erase card on phone, then copy this over and edit the same rhod500 folders, startup.txt giving the rel_path=andboot

DO I need to make it be in GBX04A folder instead of andboot? or something else i do/did stoopidly? thanks

thanks.

In case this helps someone that has this problem listed above, it is because GPS is disabled in on the windows side!

A part that I left off in the question was, that I hard reset windows mobile side, due to an issue with backlight button or I thought software problem, hoping it would fix the dang thing. after 1 more pro2 got here so I could start setting up winmo side, that is when I find the problem. Since it didnt fix the backlite, I didnt mess with winmo, and used genYdual boot, then never realized the problem.

When you hard reset, it disable the GPS down to 911 only. From then on (any android in here at PPCGeeks) android would crash on ANY APP that asked for GPS (this includes google now) SO you have to renable it in windows by going to:
I only know for WM6.5:
start menu/settings/all settings/personal/phone/goto the CDMA Services tab, find the 'location settings' in list, hit the get settings, set LOCATION ON.

once I did this, everything is working in all flavors so far (last download I have on here tho, was last week, (march 27-'11) )

Hope this helps another nubeee.. (im an ID10T sometimes.)

[percolator]

Originally Posted by Sting32

In case this helps someone that has this problem listed above, it is because GPS is disabled in on the windows side!

A part that I left off in the question was, that I hard reset windows mobile side, due to an issue with backlight button or I thought software problem, hoping it would fix the dang thing. after 1 more pro2 got here so I could start setting up winmo side, that is when I find the problem. Since it didnt fix the backlite, I didnt mess with winmo, and used genYdual boot, then never realized the problem.

When you hard reset, it disable the GPS down to 911 only. From then on (any android in here at PPCGeeks) android would crash on ANY APP that asked for GPS (this includes google now) SO you have to renable it in windows by going to:
I only know for WM6.5:
start menu/settings/all settings/personal/phone/goto the CDMA Services tab, find the 'location settings' in list, hit the get settings, set LOCATION ON.

once I did this, everything is working in all flavors so far (last download I have on here tho, was last week, (march 27-'11) )

Hope this helps another nubeee.. (im an ID10T sometimes.)

good show lad!

[matchstickredgti]

Thanks arrrghhh I was hoping it wouldn't come to that but I'm going to give it a shot. I appreciate the quick response.

edit: Well that seemed to have solved the problem. What does the HP formatting tool do differently then using the Windows format? Cause before I even posted I tried with the Windows formatting tool and it didn't work.

[hammester]

Originally Posted by mangomango

Thanks arrrghhh I was hoping it wouldn't come to that but I'm going to give it a shot. I appreciate the quick response.

edit: Well that seemed to have solved the problem. What does the HP formatting tool do differently then using the Windows format? Cause before I even posted I tried with the Windows formatting tool and it didn't work.

Crazy isn't it? I had the same thing happen to me and was SHOCKED when the HP tool worked.

[arrrghhh]

Originally Posted by hammester

Crazy isn't it? I had the same thing happen to me and was SHOCKED when the HP tool worked.

My theory is something with the partition table - Windows either doesn't touch it or FUBAR's it, and the HP Tool (and others) fixes it .

[matchstickredgti]

Another thing I would like to bring up...

When I change font size in Spare Parts, it will change the size throughout the system as normal, but if the phone goes to sleep and then wakes up, it reverts back. I don't know if it was like this in all the builds, I just now noticed.

[arrrghhh]

Originally Posted by mangomango

Another thing I would like to bring up...

When I change font size in Spare Parts, it will change the size throughout the system as normal, but if the phone goes to sleep and then wakes up, it reverts back. I don't know if it was like this in all the builds, I just now noticed.

Heh, I've never tried changing fonts. I'll confirm and let you know.

[kimtaei]

just get the gingerbread(25032011) from XDAndroid up on my TP2 but the camcorder still not working. display freeze when recording(recording time is running), once stop it doesn't saved at all. other is same with GBX0A date 11032011. fast and smooth and all the known problem still there.