PPCGeeks
Page 20 of 274 « First 101819 20 21223070120 Last »
Show 40 post(s) from this thread on one page

PPCGeeks (http://forum.ppcgeeks.com/index.php)
-   Android On TP2 Development (http://forum.ppcgeeks.com/forumdisplay.php?f=319)
-   -   NAND Testing - 05-25 Update: New LK, Recovery.img, Kernel Updates through Recovery (http://forum.ppcgeeks.com/showthread.php?t=134598)

[ACL] 10-14-2010 04:45 AM
Re: NAND Boot Testing - Keyboard Mapping Fixed, HW3D, and Battery Algo Update
 
nate

Finally got the stupid script to work 100 percent. What everyone is going to look for are the latest symlinks which point to the last build. I make symlinks for both NBH and modules. But i also have the kernel inthere as well if anyone wants to tinboot it themselves.

Since the latest on one is alreayd up can anyone test it out and see if it works? if so ill begin comming some stuff thats been pending.

damage_them 10-14-2010 05:44 AM
Re: NAND Boot Testing - Keyboard Mapping Fixed, HW3D, and Battery Algo Update
 
Quote:
Originally Posted by natemcnutty (Post 1973305)
Not sure what you meant by zip them yourself. The latest NBH should be good to go from the index, but I'm not sure that the modules are going to work. I haven't had a chance to test any of it out yet, but I think ACL is still making some changes to the autobuild code.

Tomorrow will be a good day for me to get some serious testing in. Be sure to hit Thanks on ACL's posts for getting the autobuild all set up ;)
when i dloaded it..its not in the normal module form..unless this is a new thing that u have set up the loader to look for..ill just dload from the link and just add to sd ..im about to try out the new one now :D

damage_them 10-14-2010 05:46 AM
Re: NAND Boot Testing - Keyboard Mapping Fixed, HW3D, and Battery Algo Update
 
Quote:
Originally Posted by [ACL] (Post 1973323)
nate

Finally got the stupid script to work 100 percent. What everyone is going to look for are the latest symlinks which point to the last build. I make symlinks for both NBH and modules. But i also have the kernel inthere as well if anyone wants to tinboot it themselves.

Since the latest on one is alreayd up can anyone test it out and see if it works? if so ill begin comming some stuff thats been pending.
will test and report back...i know a couple hours ago..the nbh worked but there was no sound!!

damage_them 10-14-2010 08:43 AM
Re: NAND Boot Testing - Keyboard Mapping Fixed, HW3D, and Battery Algo Update
 
tested and it doesnt go pass after the boot..no screen animation nothing..the one b4 loaded..but there just wasnt any sound

[ACL] 10-14-2010 11:39 AM
Re: NAND Boot Testing - Keyboard Mapping Fixed, HW3D, and Battery Algo Update
 
Quote:
Originally Posted by damage_them (Post 1973362)
tested and it doesnt go pass after the boot..no screen animation nothing..the one b4 loaded..but there just wasnt any sound
Thats the same issue nate reported earlier. Ok, i'll work it on it. Thanks a bunch.

pctek4456 10-14-2010 02:26 PM
Re: NAND Boot Testing - Keyboard Mapping Fixed, HW3D, and Battery Algo Update
 
are the modules built in to the nbh or are they still required on sd card?

[ACL] 10-14-2010 02:49 PM
Re: NAND Boot Testing - Keyboard Mapping Fixed, HW3D, and Battery Algo Update
 
Quote:
Originally Posted by pctek4456 (Post 1973602)
are the modules built in to the nbh or are they still required on sd card?
required on the card.

jortiz12885 10-14-2010 03:05 PM
Re: NAND Boot Testing - Keyboard Mapping Fixed, HW3D, and Battery Algo Update
 
Quote:
Originally Posted by [ACL] (Post 1973629)
required on the card.
ok so just so i dont make a mistake, i have booted into android already thru nand, but what i did was in the andboot folder the latest 9-28-10 theres already a tar.gz module file (modules-2.6.27.46-01201-g4090133.tar.gz) should i keep that there and just add the one [ACL-HW3D+BATT] (modules-2.6.27.46-01194-g3f3c4eb-dirty.tar.gz)? There should only be one module file in the andboot folder correct? Right now is working by just having the module from the first post but wifi is no working.

natemcnutty 10-14-2010 05:09 PM
Re: NAND Boot Testing - Keyboard Mapping Fixed, HW3D, and Battery Algo Update
 
Quote:
Originally Posted by jortiz12885 (Post 1973642)
ok so just so i dont make a mistake, i have booted into android already thru nand, but what i did was in the andboot folder the latest 9-28-10 theres already a tar.gz module file (modules-2.6.27.46-01201-g4090133.tar.gz) should i keep that there and just add the one [ACL-HW3D+BATT] (modules-2.6.27.46-01194-g3f3c4eb-dirty.tar.gz)? There should only be one module file in the andboot folder correct? Right now is working by just having the module from the first post but wifi is no working.
I fixed up the first post yesterday somewhat, and I'll get it cleaned up a little more today after I get some testing done. You will want to download the latest NBH and modules file from the autobuild page. I have a feeling ACL will have to change the modules to have the build version included, but I'm just now getting a chance to flash the new NBH. I'll be reporting back shortly.

Crap. Same issue as I had before. Freezes on the animation screen the first two times, and this third time the animation has been going for about 20 minutes...

natemcnutty 10-14-2010 06:42 PM
Re: NAND Boot Testing - Keyboard Mapping Fixed, HW3D, and Battery Algo Update
 
1 Attachment(s)
OK, ACL, can you take a look at these? I did a kmesg and logcat at the same time and figured I could pair up which PID was causing the crash. I have attached them to the post.


All times are GMT -4. The time now is 06:40 PM.
Page 20 of 274 « First 101819 20 21223070120 Last »
Show 40 post(s) from this thread on one page

Powered by vBulletin® ©2000 - 2025, Jelsoft Enterprises Ltd.
©2012 - PPCGeeks.com


Content Relevant URLs by vBSEO 3.6.0