PPCGeeks - NAND Testing - 05-25 Update: New LK, Recovery.img, Kernel Updates through Recovery

PPCGeeks (http://forum.ppcgeeks.com/index.php)

- Android On TP2 Development (http://forum.ppcgeeks.com/forumdisplay.php?f=319)

- - NAND Testing - 05-25 Update: New LK, Recovery.img, Kernel Updates through Recovery (http://forum.ppcgeeks.com/showthread.php?t=134598)

Re: NAND Boot Testing - 03-11: FRX05 on NAND (data working again!)

Quote:

Originally Posted by [ACL] (Post 2071330)

yeah we did since people want to install their own busybox. So even if they install it and if bin is still around then it will cause issue. /bin has to completely be removed.

Add the busybox from the rootfs to the /system/bin in the androidupdate.tgz.

Then we don't have to worry about it.

Re: NAND Boot Testing - 03-11: FRX05 on NAND (data working again!)

Quote:

Originally Posted by ffkip911 (Post 2071346)

what's free mem looking like at boot? for reference?

so the DL from page one is current as of O' dark thiry??

and did I hear something about not installing from a 16G card??

You just can't Flash the NBH with a 16GB card... Not sure what the max size is... but that is it.

Quote:

Originally Posted by ffkip911 (Post 2071349)

great!!!!!! using my 16G and booted right into xandroid. will test throughout the day ... just hope whatever is on p1 is up to date as of 2:00am PST, march 21

hmmmmmmmmmmm, phone has been on the charger for 4+ hours (100%) flashed, got the xandroid splash, buzzed, then I saw the taskbar and batti showed no power (not on the charger at this time---flashing took less than 5 min) buzzzz, orange light and nothing will wake the phone....red reset will not wake it, pulled batti, plugged in, power button---going back through code (no lights), splash with orange light (still plugged in) ......

WINNING!!!!!

still no FN on RHOD400 hard KB

set sprint for apn----no joy...showing 3g and full bars, but data goes up but never comes down...quite snappy though

It is a known issue about the battery level being 0 on first boot. There is a patch for this but ACL hasn't had time to apply it. For now just have the charger connected and you should be ok...

For the Keyboard run this command:

Code:

cp -af /system/usr/keymaps/microp-keypad.kcm.bin /system/usr/keychars/qwerty.kcm.bin

Might have to add a /busybox/cp infront...

Nate or ACL Please fix this in the install-seq.sh script. keychars should be keymaps...

Re: NAND Boot Testing - 03-11: FRX05 on NAND (data working again!)

Quote:

Originally Posted by tiger2wander (Post 2071348)

@[ACL] could you help me to get SIM card work on my RHOD500? :)

I'm newbie with kernel development but have good exp with Linux system and some programming language, for now, I still have not any clue to start with this! I just want to try to dive into kernel programming :)! and will need more help from yall.

--
Best regard!
Uoc Nguyen

actually. i just took out the batt while the phone was running like nate suggested and was able to slide in the card. Whatever it is its just affecting it during boot. since nothing shows up on the logs right now.

now like i said before you will have to wait till i get some code done because im removing that force cdma shit and that may require a new ril as well.

If you want to help and you have some programming abilities, check out the ril code and see where and how it iinteracts with the cdma flag. that needs to be rewriten to something more nand friendly. Ill get to it eventually but there is alot other stuff thats higher priorty.

Re: NAND Boot Testing - 03-11: FRX05 on NAND (data working again!)

Quote:

Originally Posted by Lmiller1708 (Post 2071367)

Add the busybox from the rootfs to the /system/bin in the androidupdate.tgz.

Then we don't have to worry about it.

the busybox apk works well actualy. gives u the option to install on /system/bin or xbin.. so let these animals do it..

Re: NAND Boot Testing - 03-11: FRX05 on NAND (data working again!)

Quote:

Originally Posted by Lmiller1708 (Post 2071372)

Nate or ACL Please fix this in the install-seq.sh script. keychars should be keymaps...

ohh snap the script is effed up? hope its not effed on the recovery as well :-(

Re: NAND Boot Testing - 03-11: FRX05 on NAND (data working again!)

Quote:

Originally Posted by [ACL] (Post 2071377)

ohh snap the script is effed up? hope its not effed on the recovery as well :-(

Yup... Remember the chat we had a while ago about this... :)
Nate fixed it in this commit HERE Not sure where it got changed....

Re: NAND Boot Testing - 03-11: FRX05 on NAND (data working again!)

Quote:

Originally Posted by Lmiller1708 (Post 2071378)

Yup... Remember the chat we had a while ago about this... :)

is it correct on git?

Re: NAND Boot Testing - 03-11: FRX05 on NAND (data working again!)

Quote:

Originally Posted by [ACL] (Post 2071379)

is it correct on git?

Found it... Commit in bootenv in Tinboot for linux-msm - Gitorious

NATE? lol... Thoughts on this?

EDIT! : This is correct! Sorry...

Re: NAND Boot Testing - 03-11: FRX05 on NAND (data working again!)

Quote:

Originally Posted by [ACL] (Post 2071375)

the busybox apk works well actualy. gives u the option to install on /system/bin or xbin.. so let these animals do it..

Sounds good to me! ;)

Re: NAND Boot Testing - 03-11: FRX05 on NAND (data working again!)

Quote:

Originally Posted by Lmiller1708 (Post 2071384)

Found it... Commit in bootenv in Tinboot for linux-msm - Gitorious

NATE? lol... Thoughts on this?

wait so its wrong on git too ?