Quote:
Originally Posted by ayato
I cannot get the SD Flashing method to work. Here is what I have tried:
The nueSPL exe from the first page extracts the TITAIMG.nbh to my SD card. This program also runs through a checklist to make sure my sd card is in the right format and everything checks out. I tell it to continue, and it goes to bootloader and stays there.
I have tried manually flashing other things using the sd method, and it never does anything when I put it into bootloader mode.
I have 2 microsd chips. One Kingston 1gb. One PNY 1 gb. I have formatted them to fat32 and tried every cluster size 4kb and below. I place the TITAIMG.nbh in the root of those microsd chips. Nothing ever happens when I put the phone into bootloader. It just sits there. After 10 minutes I just reset and it boots normally. I have done 5 hard resets and used 4 different ROMS. I am now on WM6.5 Build 21501 (Thanks Tplane37)
Two Questions:
1: Is there a way to get my sd flashing working?
2: If I go the activesync route, can I use the same RUU I used to flash my rom to 6.5 to also flash to nueSPL2.47. If not, what RUU do I use?
Thanks so much.
|
I don't know why you aree having the issue with your SD flash but your 2nd question the answer is yes. It should be the same RUU. It sounds like you have done everything right with the SD. Try to make sure the TITAIMG.nbh is the only thing on the card and see if it works. Make sure it is not in a folder. When you put the phone in bootloader you shoul see the rainbow screen followed immediatly by a grey screen. The grey screen will give the infor mation on how to proceed. Are you seeing that when you try the SD method?