[ayato]

I cannot get the SD Flashing method to work. Here is what I have tried:

The nueSPL exe from the first page extracts the TITAIMG.nbh to my SD card. This program also runs through a checklist to make sure my sd card is in the right format and everything checks out. I tell it to continue, and it goes to bootloader and stays there.

I have tried manually flashing other things using the sd method, and it never does anything when I put it into bootloader mode.

I have 2 microsd chips. One Kingston 1gb. One PNY 1 gb. I have formatted them to fat32 and tried every cluster size 4kb and below. I place the TITAIMG.nbh in the root of those microsd chips. Nothing ever happens when I put the phone into bootloader. It just sits there. After 10 minutes I just reset and it boots normally. I have done 5 hard resets and used 4 different ROMS. I am now on WM6.5 Build 21501 (Thanks Tplane37)

Two Questions:
1: Is there a way to get my sd flashing working?
2: If I go the activesync route, can I use the same RUU I used to flash my rom to 6.5 to also flash to nueSPL2.47. If not, what RUU do I use?

Thanks so much.