View Single Post
  #352 (permalink)  
Old 05-04-2009, 02:41 PM
chunnel's Avatar
chunnel
PPCGeeks Regular
Offline
 
Join Date: Sep 2008
Posts: 94
Reputation: 40
chunnel is just getting started
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Re: SPRINT WM 6.5 Beta Rom (test) NON M2D. Clean version added

Quote:
Originally Posted by 1loudsvt View Post
HOW TO FOR VZW USERS

This will be updated as I discover more.

This has all been done using the clean rom as I had many issues with the other.

What worked on a fresh flash
1. Voice
2. Data
3. SMS
4. All hardware

GPS
1. This is assuming you have already done the agps hack
2. Dial *228 and choose option 1
3. Soft reset the phone
4. Open your favorite gps app and you should have a lock within 30 seconds.
(if that does not work make sure you have location on in the phone settings. Also make sure that under gps settings you have the baud rate set to 4800 and the com port set to 4)
If it still does not work check the following reg settings
[HKLM\Software\HTC\SUPL GPS]
\EnableAGPS = 1
\EnableSmartMode = 1
\GPSMode = 4 (should also work as 2)
\NumberFixes = 999999999
\QoSAccuracy = 50
\QoSPerformance = 89
\ServerIP = 195.207.101.126
\ServerPort = 7788
\timeBetweenFixes = 1

MMS
1. Go to connection settings and select "Manage existing connections"
2. edit the only connection there
3. Name it whatever you want ie "vzw"
4. hit next and enter #777 as the number
5. hit next and put "your10digitnumber@vzw3g.com" and "vzw" as the password
6. hit finish
7. install the attached arcsoft cab
8. do a soft reset.
9. open phmregedit in the start menu
10. navigate to HKLM\Software\Arcsoft\ArcsoftMMS UA\Config\mm1\WspHeader\X-VzW-MDN and put your 10 digit phone number for the value
11. wait a min or two and do a soft reset
12. go into messaging select menu and then mms options
13. select the server tab
14. select verizon wireless and change connect via to "the internet", the other settings should be correct.
15. wait a few min and perform a soft reset once more
16. now mms should work!!!

Still to come
1. Exchange Issues
2. Anything Else?

If you have any questions just ask.
I did everything as stated, twice now with a hard reset in between. But the key-value-data "X-VzW-MDN" never appears after the cab install and the soft reset. So should I create it, if so, in what fashion? I have also done a search for that key-value-data entry and it isn't anywhere in the registry.