Quote:
Originally Posted by decibel
There is a separate driver being installed after reboot of the device. Once the device goes into bootloader mode, Windows has to install a different driver. Force your phone into bootloader, plug in your usb cable and go to device manager to make sure the driver is being installed.
To get into bootloader: Hold Down the Power button, Volume DOWN button and push the stylus into the reset hole. Release the power and down buttons when the screen gets to the tricolor bootloader screen.
|
I think this is your problem if you don't see the PC load a new driver once interring bootloader mode you need to force the PC to load the driver. Instructions above. I am new to flashing the TP so it took me a few tries to figure this out once the driver is installed everything went well.