Quote:
Originally Posted by clubprerit
yes, i did EVERYTHING twice. i'm cooking my own rom using scotts c2 rev kitchen, checking the proper settings. i can't think what would make it do that...
|
I can't think of what the problem could be either. It seems like you must have missed something. Let's start from the very beginning and try again.
1) Make Sure that the phone is unlocked.
2) Download the Core Kitchen C2 and the OS
3) Copy the OS SYS and ROM files into the C2 Kitchen
4) Remove the SD Card.
5) Connect the Phone via Active Sync and make sure that it is synced.
6) Click on the xxx.BAT file to start the build.
7) To be sure there is no problem, only use a minimum number of items from the BuildOS screen. Since you want TouchFlo, make sure that you use all items labled "HTC****" and TouchFLo. Make sure that QuickGPS and HTCGPSTool are checked.
9) Double check to be sure where it says check only 1 box, that one, and ONLY 1 is checked (make sure there is any entry for each section)
10) When you are done, click on the "Play" button at the top of the BUILDOS screen. Watch the bottom status bar, and you should see the prgress. When the status bar says "DONE", use the RED "X" in the upper right corner to close the BUILDOS screen.
11) Everything else happens automatically.
12) Phone show the bootloader screen.
13) As the ROM is being loaded, you should see a progress bar both on the Pc and on the phone. At the end, it will say 10% completed and the phone will start rebooting.
14) Wait until the reloading and rebooting process is complete along with all the customizations.
15) Due a HARD RESET (because of your previous problems)
16) After the phone has rebooted, insert the SD card, and everything should be working fine.
Let me know if you have problems with any of the steps.
Bob