Well here's one for the guys out there who chose to flash there Daimond to Cricket: =D>
Post by Sam Sinister:
Recently, I purchased a
HTC Touch Diamond that was supposedly fully flashed to cricket using the
ToO’s ROM (But I’m sure they will work on other ROM’s). My internet was working but my
MMS was not working at all like they said they would and after they charged me $65.00 but after completing the steps in this document, I had no problem but I could only confirm that I could send have not tried to receive yet.
This is using
Arcsoft MMs_5_0_31_16 on
ToO’s Cricket Diamond edition ROM but could work for you as well. Please follow these steps carefully and one by one in my case the phone was already flashed but the
MMS didn’t work.
HKLM\Software\Arcsoft\Arcsoft MMS UA\Config\MM1 Default Setting Cricket MMS and Change
WAP default Port 1&2 to 8080 and
WAP Default Time Out to 10000
HKLM\Software\Arcsoft\Arcsoft MMS UA\Config\MM1\MMSCSetting\Cricket MMS Ensure
Gateway Port is 8080, ISP is Cricket MMS, MmscURI is set to http://mms.mycricket.com/servlets/mms ,
Name is Cricket MMS, Ensure the next 4 settings
WAP1RecvDefault Size, WAP1Send WAP2 Recv and WAP2 Send are set to 1024000, WAPType to 1 (WAPType to 1 Ensures WAP 2.0) also make sure that you check the following settings as well;
Configurable is set to 1, ConnectionVia is set to {0789CC17-B679-D3F5-73CD-8AD4CB9, and PacketSize is 1000.
HKLM\Software\Arcsoft\Arcsoft MMS UA\Config\MM1\MMSCSetting\Cricket MMS\WspHeader
Accept: application/vnd.wap.multipart.related
X-Cricket-MDN this is
your 10digit cell number (this might say X-Verizon or X-Sprint Change the value name to
X-Cricket-MDN) Value Data 555-xxx-xxxx, of course put in your own phone number no dashes.
HKLM\Software\Arcsoft\Arcsoft MMS UA\Config\MM1\MMSCSetting\WspHeader\
Domain http://mms.mycricket.com/servlets/mms
SizeLimit WAP1RecvLimit 1,2,3 set everything on that page to
1024000 (this is part of your 1000K send and receive limit)
The setting below was not available on my phone so I skipped it but if it is on yours please make sure you change it:
HKLM /software/arcsoft mms ua/config/UI
find
EnableServerEdit and change it from 0 to
1
Again the setting below was not available on my phone so I skipped it but make sure that you double check to see if you have this string and deleted it:
HKCU\Software\Microsoft\Windows\CurrentVersion\Int ernet Settings Where it says Connections, Delete that entire string Hold down stylus on Connections circles it and delete it; this is what keeps the MMS from sending. Bad thing is every time you open explorer it re-writes this registry. To solve that many of us have just used something else besides Explorer. Like Opera, Firefox Mobile or Skyfire.
You can still use these browsers without writing the Connections Value. If you don’t want to use anything but Explorer, you are going to have to go into this registry file and delete the Connections string every time to send MMS or until someone comes up with a registry hack to Auto delete this value every time you close IE …Close Regedit.
Now go to your
messages and click
menu/MMS options and then click
server and click
add new. Add new or if you already have one called something else just click it and click edit...you need to change these settings to
Server Name: Cricket
Gateway leave: blank
Port Number: 8080Server address: http://mms.mycricket.com/servlets/mmsConnect Via Cricket: MMS
Double check your settings:
Sending limit (should be
1024000 if you changed these settings correctly in regedit)
Wap version Wap 2.0 (Wap 2.0 should be pre selected, if it is don’t touch it. If it keeps reverting back to 1.2 when you click close? Go back into regedit and select
WAPType 1 as mentioned previously, this forces it into
WAP 2.0 without it MMS won’t work.) Now if you have more than 1 select the cricket one you just configured and hit set as default then go back to
HKLM\Software\Arcsoft\Arcsoft MMS UA\Config\MM1\MMSCSetting\Cricket MMS and delete the other configuration, when you go back into settings
Cricket should be the only one there and it should be default.
The settings below are only if you are setting up MMS for the first time on partially flashed without MMS. Remember my phone was already flashed.
Start\Settings\Connections\Connections Under the General Tab Enter Cricket. Under the Modem Tab put in Cricket Mobile Web select modem to cellular line. Click next put in #777 to dial to Cricket, click next… User Name:
your10digitcellnumber@mycricket.com Password: cricket Domain: Leave Blank, click finish…under proxy settings, check these 2 boxes (this network connects to the internet, and this network uses a proxy server to connect to the internet) Proxy Server: wap.mycricket.com click advanced. The only thing with a value should be HTTP wap.mycricket.com:8080 the rest blank if your MMS still doesn’t work click on start
/settings/ connections/connections/then click on
edit my proxy server then click on
Advanced, click on
WAP and set to
wap.mycricket.com.
Port 8080 and do the same for
Secure WAP &
Socks. Click ok and ok again, this ok should bring you back to the connections screen at the bottom click advanced. Click select networks. Under both drop downs select Cricket. Click Ok Go into Exceptions Click add new URL for each of the following settings you are going to need to click add new url again, these don’t all go under one “Add new URL” Block
mms.mycricket.com/servlets/mms
.mms.mycricket.com/servlets/mms
mycricket.com/
.mycricket.com/
.mms.mycricket.com/
mms.mycricket.com/
And there you go; good luck and all the stores I went to help for wanted to charge me anywhere from $50 to $80 to re-flash it, ha, ha, ha,