I will be adding links later on, but for those who are resourceful, this could be helpful with out the links.
***You will be charged the $9.99 monthly fee for using VZ Navigator, this is NOT meant as a freebie, I simply figured out how to get past the driver and certificate issues.***
As usual, I am not responsible for any screw ups on your phone. I finalized this fix at 5 AM, after spending well over 72 hours pondering and flashing ROMs, failing countless times before I actually got it to work.
Now, on to the good stuff. I did this with the MR1 upgrade, I downloaded the MR1 RUU at about 4 AM and it was the newest update at the time. At 6 AM when I went to get the link, they now have a MR2 upgrade listed. I am attempting these same steps on the MR2 ROM after I post this.
This was done on an XV6800 (Verizon).
Unlocked with nueSPL-2.47.
ROM: 3.57.605.1 (Build 19212.1.0.3)
Radio: 3.37.75
WM 6.1 Professional
Step 1: Flash MR1 Update and run through the normal setup (The ROM is now "semi-locked/locked.")
Step 2: Load VZ Navigator 4.1.0.120-PROD.cab
[I also loaded VZW_Visual_Voicemail.cab, but Verizon says they are not yet able to add the feature to the account to run this service, but may be coming soon because they Tech Reps had a meeting yesterday morning that said a number of phones were going to be added to the list for using the VVW.]
Step 3: Run through the full setup on the CABs installed in Step 2. This installs your Certificates, Drivers, and makes the requires Registry Entries.
Step 4: Install and setup all of your CAB's of choice. There are some that will not install at this time such as "dotFred RegEditor" and a handful of others...don't worry, just set these aside in a pretty little folder and install them later.
Once you have gone through all of your setups (this is to make sure Registry entries are already made, such as with iContacts changing information on your Today screen, which will require another Registry Edit if you decide to put it on, simple fix though.) It is now time to move on to the next step, so go ahead and get your Titan synced back up with Active Sync 4.5 if it's not already.
Step 5: Install (on your PC) CeRegistry Editor. After the install, and once your phone's Synced, run CeRegistry Editor.
Step 6: Press [F1] to "Make a Connection with you Device"
-You should see your 3 main folders: HKCR, HKCU, and HKLM.
Step 7: On your Menu Bar Select "Tools">"Unlock Registry"
-This will allow you to make your registry edits with out erroring out when you try to.
Step 8: Make the following Edits/Additions to your Registry (This disables Certificate Security...ie "Unlocks") :
HKEY_LOCAL_MACHINE\Security\Policies\Policies\0000 1001 = 2
-> Change the value data from 2 to 1
HKEY_LOCAL_MACHINE\Security\Policies\Policies\0000 1005 = 16
-> Change the value data from 16 to 40
HKEY_LOCAL_MACHINE\Security\Policies\Policies\0000 1017 = 160
-> Change the value data from 160 to 144
HKEY_LOCAL_MACHINE \Security\Policies\Policies
-> Add new value "0000101b": Dword = 1
Now, the THIRD ICON from the left is a green button, when you hover over it, you will notice this button will perform a "Soft Reset" on your phone. You can press this button, or simply hold your reset button on the phone itself for about 2 seconds to manually do a soft reset.
Step 9: Verify that your VZ Navigator still loads up and functions. If it does not, then Sync back up, and verify that you made the correct entries in your Registry.
Step 10: Go back and install all those CABs that wouldn't install or run earlier due to your phone being locked.
Enjoy the freedom of an unlocked ROM with aGPS. Be sure that you call up Customer Service and ask them to try out VZ Navigator. I believe you can still "Test Drive" it for 30 days for free, but Customer Service still has to put it on your account.
There were many members here at ppcgeeks, over at xda-developers, verizon-xv6800.com, as well as a new member here "Yoda" who is a personal friend of mine and a Microsoft Certified Technician who helped out with provideing me with the knowledge to pull this off.
A particular member over at xda-developers deserves a very big THANK YOU! Thanks Tegrad. Check out his post (#11) at
this link if you want to do some more tweaks while you're in your registry. I did 90% of them, and they all worked flawlessly! Anything from the unlock information I posted above, to setting your tower checks, increasing your phone volume, switching your bluetooth from Mono to Stereo, and playing with your LED indicators. It's a long list, but worth mentioning.
GaMedic's ROM was my insperation (and my back up if I completely screwed up my attempts!). I liked everything about his ROM except that I couldn't use my VZ Navigator, which I actually like and don't mind the monthly charge for. And for the following CAB files I threw in to mirror GaMedic's ROM as close as I could both visually and functionally (as far as I can tell at the moment), and a couple that I added for personallization:
***
www.Dashwire.com from the PC and m.dashwire.com from your phone for the CAB.(Backing up contacts, text messages, pictures, videos, and emails...FREE!)
***Google Maps
***Marsware Weather Panel (Thanks GaMedic for pointing me to this, it's great and quite accurate)
***Pocket Digital Clock (Thanks again to XDA-Developers for the special fonts)
***PocketRAR
***S2U2 (Cool little functional tricks all over the place in the setup), S2P, S2V (great photo viewer).
***VZW Visual Voicemail.
***VZ Navigator
***Yahoo! GO
***Carlos Black Diamond Dialer (TITAN version)...Be sure to allow the reset for this to work!
***Black Diamond Theme
***iContacts Black Theme (Be sure to pay attention to the RegEdits at the link above to move your button from the left to the right of your today screen to replace your factory Contacts.lnk)
***MP3 Trimmer-Diamond
***dotFred RegEditor
***XDA-Team Opal Volume Control
***HTC Opal Comm Manager 2.7.1.8
Please note that I did not develop ANY of the above CABs. I will be sure to credit those responsible later on. I have to look them all up again.
Now I am going to try the MR2 Upgrade and see if this works their too. I will edit this post with a simple one liner to Update you guys/gals.
Enjoy!
***EDIT*** I removed iContacts due to a lack aof stability. There may be a newer release out there that I will try when I find it. But for now, iContacts has been removed and I have had no further issues on the MR2 upgrade with these modifications. Also, the MR2 is an RUU. If someone is able to convert an RUU to be used via the SD method, please pass the info on as to the "How To's" or post the file here so we can have a back-up and watch things progress.