[BorisD]

here is a chain of command ( since i changed the CID before it already is at 00000000 so no changes were needed)

"rtask a
Enter Radio Bootloader
POWER ON PMIC VREG_USB : SUCCESS!
Invalid cmd!...readCID
@CID: 00000000
Cmd>rtask c
Calibration

No card inserted

HTC_SMEM_CE_RADIO_DBG_FLAG:300

Enter Radio Image"

At this point mtty/ Diamond freez... i have to reset the device
now i type in info 8 and get the below

"info 8

--- 2K bytes sector version ---

DEVICE NAME=samsung_k9k2g08
DEVICE ID=0xAA
DEVICE MAKER ID=0xEC
PAGE SIZE=0x800
TOTAL PAGE SIZE=0x840
BLOCK COUNT=0x800
BLOCK PAGE=0x40

Checking block information

BLOCK 10 (0xA) is reversed block
BLOCK 11 (0xB) is reversed block
BLOCK 12 (0xC) is reversed block
BLOCK 13 (0xD) is reversed block
BLOCK 14 (0xE) is reversed block
BLOCK 19 (0x13) is reversed block
BLOCK 20 (0x14) is reversed block
BLOCK 21 (0x15) is reversed block
BLOCK 22 (0x16) is reversed block
BLOCK 23 (0x17) is reversed block
BLOCK 342 (0x156) is bad block
BLOCK 534 (0x216) is bad block
BLOCK 1146 (0x47A) is bad block
Partition[0], type=0x20, start=0x2, total=0x63E
Partition[1], type=0x23, start=0x640, total=0x840
Partition[2], type=0x25, start=0xE80, total=0xD5C0
Partition[3], type=0x4, start=0xE440, total=0x2D640

CE Total Length(with sector info) = 0x7292200
CE CheckSum Length(without sector info) = 0x7220000

Cmd>"


"Cmd>info 7

HTC Integrated Re-Flash Utility, Common Base Version : 1.51d
Device Name: Diamond_C, Bootloader Version : 0.43.CMONEX
Built at: May 16 2008 18:29:36
Copyright (c) 1998-2007 High Tech Computer Corporation

Board ID=0x80
gCurrentPanel=0x1

CPU ID=0x4117B362
AMSS7501A

MicroP-Diam Version : 11
PSOC-Diam STAGE_EVT v20
RAM Size : 128MB"

thanks again for any and all help.