Well I know alot of people are having this problem so I will make a decent post about it.
Bear with me I am still learning and have had the diamond for less than a week.
If you have no data/internet at all on your phone after flashing to this ROM, I fixed mine last night with some thorough research.
Dial ##3282#
Goto View
Make sure the first line says "1" and not "0"
If it says 0, that is your problem.
To change it to "1" you must get your MSL
To get your MSL, you must either get it from your carrier (sprint) or
you can use a method to get your MSL
I used PHM Reg Editor,
http://freewareppc.com/utilities/phm...ryeditor.shtml
*credit to
bunvilla*
----------
* Change the following registry entries in:
HKEY_LOCAL_MACHINE\SOFTWARE\HTC\ATDbgLog
Enable: 1
LogMode: 1
* Wait a reasonable amount of time and soft-reset (I have noticed that it seems to take longer for this value to take affect, so if you reboot and the registry values are not changed, then you need to do it again and wait longer)
* Check to see that the file \atlog\ATDbg0.txt has been created.
* Return the values back to what they were (most likely 0) waiting the same amount of time as above.
* Look in the ATDbg0.txt file and you should see a log of commands sent to the CDMA radio and there should be something like this somewhere in the file:
Code:
11:9:3 Tx:AT+HTC_RMSL=0\r
11:9:3 Rx:+HTC_RMSL: 354201\r\n0\r
11:9:3 Tx:AT+HTC_ROTKSL=0\r
11:9:3 Rx:+HTC_ROTKSL: 216112\r\n0\r
* The numbers next to the Rx: +HTC_RMSL line should be your MSL... I do not know what the ROTKSL is for, but included it in the snippet incase someone knows.
---------
That did it for me. I hope this can help more people as I cannot use any other Rom than juicy's.