Quote:
Originally Posted by bsepub
|
I tried following the steps in the above link and I can't get it to work. Any help would be appeciated.
Below you will find the steps the link above tells me to take to unlock using imcokeman unlocker 2.31GPS.
Unlock with coke unlocker step:
1.While phone is on, put phone into bootloader mode by pressing all these buttons at same time: Camera +Power +Reset. P.S. Easiest way to do this is hold phone in left hand, thumb pressing power button, pointer pressing camera, and then while holding those right hand pressing 'soft reset' pinhole button with stylus(button on slightly right side on bottom/underside of the phone near the USB input). Hold all these, till a rainbow screen appears. if you have the default SPL of .36, means you havent done anything with phone probably yet and can continue. (BUT if you have Coke SPL 2.31 listed there (then you prob already unlocked phone before), and you can skip to step 2 to flash a carrier rom step to get a new radio if you havent, or to step 3 to flash a user rom if you have already flashed a carrier rom before to upgrade your radio)
Step 1 is completed successfully. When I get to the rainbow screen it displays the default SPL of .36
2.Press soft reset button to load phone back into Windows Mobile.
Step 2 completed successfully.
3.Download ImCokeman 's latest vogue unlocker tool
Step 3 completed successfully as long as the most current is 2.31. If someone can look at the link to the actual file to make sure it is up to date or if maybe I'm missing some part of the instructions for installing imcokeman please let me know. Here is a copy of the link I am getting the unlocker from...
ftp://up.ppcgeeks.com/Vogue/Users/Im...r_MFG_2.31.exe
and here copy of the link to the full directions is at the beginning of this thread
4.Make sure phone is connected to your computer via Activesync. ( install Activesync software on your computer if you havent from the disc verizon/carrier gave you (if not download Here) , connect phone via the mini-USB cable to computer, make sure says connected to activesync, aka activesync should be a green icon near your 'windows clock' area [hopefully not grey which means not connected]).
Step 4 I have Vista so I am using Windows Mobile Device Center and Sync Center both from Microsoft. Do I need to install Activesync still? That wouldn't make any sense. There is a green icon next to the windows clock but it is always green even when my vogue is not connected.
5.Run ImCokeman unlocker tool on your computer. (just click the .exe from that file you downloaded, it will create a temp directory in that folder with all the files it needs, and auto-run Vogue_unlocker.bat for you. if this doesnt work, unzip the file manually, and run that .bat)
Step 5 for this step all I do is click on the icon for Vogue_unlocker_MFG_2.31.exe it pops up a open file-security warning window that says, "The publisher could not be verified. Are you sure you want to run this software?" Then I click on run and it opens a winrar self-extracting archive window. In the window it says first to Press Install button to start extraction, second Press Install button to start extraction, and last Press Install button to start extraction. It has a destination address that says tmpvg23 and then I hit install which places that tmpvg23 folder on my desktop. I could change that location if I need to because it has a browse button but I just left it alone.
6.A black command line window pops up on your computer. Follow the instructions, it wil ask you to unplug and reconnect your phone at some point. By end of the steps, Your phone should now display rainbow screen that says 'SPL-2.0 Coke' i believe
Step 6 After I hit the install button in the last step the black command line window pops up. It then says "Connect your device via activesync before continuing. Press any key to continue. . ." I've had it connected from the earlier step. That is ok right? I hit enter next and the it says "initializing" then it says "#### The next step will be to load a temporary SPL
to ram with JumpSPL #### press any key." I hit enter and then my screen swiches to what I think is the rainbow screen it is red at the top, then green, then blue, and then white. It disconnects me from Windows Mobile Device Center everytime right after I hit enter that second time. It has probably been over 30 times in a row that it happens. In the red it says . . .
VOGU100 MFG
SPL-2.00.Coke
CPLD-3
The green strip and the blue strip hav no writing in them and then the white strip says USB in the middle of it's strip towards the top of the strip. Back in the black command window it says. . .
####
Your Device Should now be in 3 color screen showing the Soft Bootloader
####
_
####
You must now disconnect and reconnect that device from your PC
Do not make any other changes at this time, but don't skip this part.
####
_
####
*** Repeat : You MUST disconnect and reconnect the device at this time
####
Press any key to continue . . .
I then unplug it and when that happens where it said USB in the middle of the white strip said SERIAL then I plugged the mini usb back in and it said USB. The whole time in Windows Mobile Device Center and Sync Center it still says not connected even though we unplugged and then plugged like it told us to. I think I still need to disconnect and connect one more time. We disconnect and then connect again. Samething USB to SERIAL to USB. This time and last, right when I connect or disconnect the computer is makeing a noise.
After Disconnecting and connecting again twice I hit enter and the black command line window types . . .
_
####
Starting the Rom Upgrade Utility. Please follow the steps on the
RUU to compete the relocking process. Press enter when conplete.
I'm stopping here till I get some answers because it popped up a "PDA Phone ROM Update Utility 3.19.4.3" This has to be one that was included in the unlocker. I thought the unlocker was just an unlocker. What should I do??????? My Verizon Wireless XV6900 aka HTC Vogue is still on the 3 color screen that says. . .
VOGU100 MFG
SPL-2.00.Coke
CPLD-3
. . . and this ROM Utility popped up. Do I soft reset and then do the utility???????? Any help would be great.
7.If it didnt restart your phone automatically at the end of its steps, Soft reset your phone by pressing the small pinhole to get back into Windows Mobile
8.Get back into bootloader mode by pressing Camera +Power +Reset. Should say 'SPL-2.31 Coke'. Dont continue doesnt say this. Redo the Unlocker step if says 'SPL .36' still.
9.You can move on to next step, you can flash the new rom from this step without soft-resetting into Windows Mobile again.