|
mn3kgtvr4: The soft reset bug should not have been resolved until pr6. The eralier roms did not have the init re-ordered. As to the SD dispaering, this would happen when some of the drivers were overwritten with those that ship in some extended roms. Do a search for the files that caused this as you should be ablt to just delete them. Also you may want to hard reset and see if it still seems sluggish. Some times I have noticed this with the same rom version but seeemed to run a bit slower/faster after a first boot. Believe it may be the first boot initalisation that could be suspect.
Boss_429:You could try sbsh pocket weather as this is what I use and like. I know it works without issue on this rom. Others have posted that weather panel does work so you may just want to re-install it over itself.
tpearson: I do not have a BT headset to test.
Is anyone else seeing this???
SportbikeRiderXX: no fonts were removed or changes. Actualy fonts were added. But what you are seeing is Cleat type as others had posted. I had them on in all areas and people complained so I reset it back to defaults (off). just re-enable it via the GUI or search the reg for cleartype and set all 0 to 1.
bacspasm: Try opening the keyboard (landscape) and then hit the up arrow on the sip. This should show nullkeyb. Edit: I just tried this and it did not show up. Ill have to comp the buid when I get home to see if something is missing.
PolloLoco: Read the first post about the A2DP fix as it details this change. I would just remove the min max setting and use the fixed value. I would go with 34 and see if that does it. Then just increase it until you have issues then step on back.
When I turn on my BT Stereo headset, all sound is piped to it with the eception of calls (Calls still go to handset, ringer to bt) all other sound goes to the headset. This is actauly what I would expect as I would not want alarms and such going off (or even the ringer) on the handset whan I am listening to music an may not hear it. More so when I can walk away from the phone and leave it at the desk or charger.
mattdb: I would do a hard reset, then put the phone right back into the bootloader. Download the PR6 build again and reinstall it (the latest build will not need the MUI fix cab). After installing make sure to hard reset and do not load the extended rom. See if this workls for you. If your still having issues, try another rom package and see if it is the hardware. Others seem to be getting this to work fine. It could be an issue with the package if someong haked it.. let me know what you find out and if I need to re-up the package.
Bubblebreaker app, Is this working for anyone? It works for me but I am not on the same build as all of you. Can someone verify? I can reload the pr6 pakage if need be.
-saridnour
|