Can someone follow these steps and see what bell has set the GPSOne options as? Also, if the gps doesn't work, maybe this can help.
QPST GPSOne Settings:
1. Connect your Vogue to your computer with the usb cable. This is also an excellent time to back up anything, just in case.
2. We need to put the phone in diagnostic mode. This is done by running dmrouter.exe, similar to epst.exe by dialing
##DIAG Send (##3424 Send) or
##DIAG# (##3424#)
3. Let windows install your new hardware. There will be two dialogs that come up. The first one should install after you click next. The next will require a file called
qcmdmxp.sys and says it can't be found. As luck has it, your computer already has this file, and it's located here:
C:\WINDOWS\system32\drivers\.
Simply tell the wizard to look there, and it will show the file, click on it, and the installation will finish.
4. Install
QPST if you haven't already.
5. Run the
Service Programming program under the
QPST start menu.
6. Double click on the
little globe at the bottom right of your screen.
7. Click on
Add New Port, and add
COM4 - USB/QC DIAGNOSTIC. (might be another COM for some people)
8. Close the QPST Configuration window, and go back to the
QPST Service Programming window.
9. Click on your phone, which should now be there, and then click
OK.
10. Click on Read From Phone and then enter your
SPC and click
OK.
11. Goto the gpsOne tab (you'll have to scroll to the right) and enter these details:
Code:
Allowed = checked
Assistanc-Spherical = checked
PDE IP Address = 216.198.139.92
PDE Port Number = 8889
PDE Transport = IP
Position Calculation = PDE
12. Reset.
(Thanks to Ghetto)