will need someone else to test this. This was tested using an esn from an active mogul and entering the information on a cloned touch.
1. Change ESN from mogul to touch.
2. Enter mdn and msid via ##msl#.
3. Change all information in M.IP default and M.IP customer to match Mogul.
4. Not needed
5. Open Qpst Version 2.7 build 215
6.Go to Qpst Start Clients EFS explorer Enter MSL
7.Exit efs explorer
8. now open QXDM version 3.09.19
9. Once in QXDM go to NV ITEMs then to hdr_an_auth_passwd_long ITEM 01192 located in the Data Category.
10.Write down all the hex vales skip the first start with password 0-15
11. Now go to QPST service programming
12.Click read from phone
13.Then go to M IP Profile
14.click profile 0
15.then go to AAA shared secret and enter the hex values u wrote down do not use 0x00 just 00 and so on
16.now click ok
17.then click write to phone
18.then exit
19.now go to phone and enter ##778#
20.now go to edit
21.then go to M.IP default profile
22.make sure HA shared secret says secret in lowercase
23.click menu ok then reset
i dont take credit for this. I did some searching and found this. it works for me!!!!!!!!!!!!!!!!!!!!!!!!!!! ENJOY
