UPGRADING ANY TOUCH TO v3 Radio
- Make sure your phone is fully charged. I would strongly recommend using a program such as SPB Backup to backup all important information on your device as it will be hard reset multiple times during this process.
1. Download ImCoKeMaN's new v2.31 Vogue Unlocker: Here
2. Make sure your device is connected to ActiveSync or Windows Mobile Device Center, whichever you have.
3. Run Vogue_unlocker_MFG_2.31.exe and follow the on screen instructions. It is VERY easy to do this wrong so MAKE SURE YOU READ ALL ON SCREEN INSTRUCTIONS during the process of unlocking your device. Your phone will display SPL 2.00.coke at first but will then change to 2.31.coke as you progress through the process.
4. Allow your phone to boot up completely into OS once the unlocker process is done. Hold the power and camera button and insert your stylus into the soft-reset hole next to the mini-usb port on the bottom of your phone. It should display an SPL of 2.31.coke.
IF YOUR DEVICE DISPLAYS THE 2.31.coke SPL THEN CONTINUE TO STEP 5. IF NOT, REPEAT STEPS 3&4 UNTIL IT DOES.
5. Reboot your phone so that it is back in OS and you are able to use the phone and connect to ActiveSync/WMDC.
6. Download and run: Modded Alltel Rom
and follow the on screen instructions. It is much the same as any RUU you may have used before. The update will appear to have crashed at 11%. Do NOT be alarmed as this is normal.
THIS STEP CAN BE FATAL FOR ANYONE SO READ CAREFULLY!!!
7. When RUU is completed, align screen and set date and time as usual.For All Non-Alltel users once you finish aligning the screen and setting the date and time it will say "Tap the screen to continue". As soon as you do this it will immediately display a message that says "Customization will begin in 3 seconds. Press OK to continue." SOFT RESET NOW!!! Do NOT allow carrier customization to run. Soft reset during that 3 seconds.
8. At this point your phone should be booting back up.You will still be able to make and receive calls. At this time, test your internet and see if it works.
9. Next Download
RUU and one of my new Roms in the next post. Flash using RRU.