[Perasite]

Step 5: vold.fstab

Important Note: This step is currently required for CM7, but is likely NOT required for most other ROMs. To find out if you need this step, connect your gTab (while it is powered on in normal operating mode) to your computer. If you get a message that USB is connected and asking if you want to turn on USB storage then you can skip this step.

If you are on the current version of CM7, though, you will see nothing when you connect the USB cable to your gTab. Well, then, how do you move additional files back and forth between your gTab? You'll need to install the vold.fstab.zip file attached below. To do this, you will need to copy the file to either a USB thumb drive or a micro-SD card.

Install vold.fstab

1. Once you've copied the file onto a USB thumb drive or micro-SD card, insert that into your gTab. Open up the File Explorer, navigate to your inserted drive and copy the vold.fstab.zip file to the ROM folder that you created earlier on your internal drive.
2. Reboot your gTab in to ClockWorkMod mode
3. Choose "install zip from sdcard".
4. Go into folder "Rom" and choose vold.fstab.zip. Watch it install.
5. Once this is complete, go back out to root menu and choose "reboot system now".

You should now be able to connect your gTab to your computer and mount it as a drive.