Please help me get my phone unlocked, a new radio, and a new rom. I can't get anywhere. And I'm reading/download/trying everything!
I've read this:
http://forum.ppcgeeks.com/titan-deve...r-own-rom.html
and I can't get past the first step!!!
I've read dozens of other full threads to try and move forward.
I've donwloaded all these:
Hard-spl-mfg.exe
titanunlocker
Titan radio Rom 3.42.50
dcd verizon carrier 20081031
tink's titan verizon 29007
dcd_titan_4.1.2.exe
I even went and got a 2gb NON HC Micro sd card, formatted it to fat32 512allocation, I just can't move forward from step 1.
Here's where I am:
1) Start the phone and confirm connection via active sync (over usb)
2) Run hard-spl-mfg (windows xp machine)
3) phone restarts to bootloader and reads: TITA100 MFG SPL-2.40.Olipro CPLD-9
4) hard-spl program reads: "disconnect and reconnect to continue"
5) I disconnect and reconnect phone (phone remains at bootloader screen)
6) (Active sync connection is lost sometime in here)
7) hard spl program says it is starting RUU
RUU starts
9) I confirm I have read the cautions and hit "next"
10) RUU tells next 4 steps:
1a.) connect phone via usb (done previously as instructed by hard spl program)
2a.) establish an active sync connection (how can I do this the phone is on the bootloader screen?)
3a) disable hybernation/standby on host pc (done)
4a.) make sure main battery charge is at 50% (done)
So I assume I have to reset the phone at this point to comply with step 2a above.
I reset the phone, confirm connection via active sync, click the "I completed the step indicated above" in the RUU and click "next"
RUU gives my image version 3.57.605.2 and says "Select from below" I click "update"
then it says verify that you want to update the rom version from:image version 3.57.605.2 to image version: Hard-SPL_2.40
I hit next, it confirms that it will take 10 minutes, I hit next, it starts the process, the phone resets, bootloader loads reading TITA100 SPL-2.07.0000 CPLD-9. Then RUU says: "error [262] update error".
I don't know what I am doing wrong, or how to fix it, but I know I have the right software, hardware, and tools to do so. Please give me the guidance!!!