View Single Post
  #1253 (permalink)  
Old 02-16-2011, 01:58 PM
Lmiller1708's Avatar
Lmiller1708
Flashaholic!
Offline
Location: La Crosse, WI
 
Join Date: Aug 2008
Posts: 873
Reputation: 2160
Lmiller1708 is a VIPLmiller1708 is a VIPLmiller1708 is a VIPLmiller1708 is a VIPLmiller1708 is a VIPLmiller1708 is a VIPLmiller1708 is a VIPLmiller1708 is a VIPLmiller1708 is a VIPLmiller1708 is a VIPLmiller1708 is a VIP
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Re: NAND Boot Testing - 01-07: Panel power on/off fixes

Quote:
Originally Posted by [ACL] View Post
No wifi !!! ? woa

ok, lets troubleshoot this.

Follow these steps.

1) check the sysinit.rc file on the bottom for the wpa supplicant service. Make sure it all ways eth0 and not tiwlan. This was my first mistake.

2) Make sure /etc/wifi has the correct wpa supplicant.conf that uses eth0 as the interface

3) Check that the correct interface is on the dhcpcd.conf file.. eth0

and last, when you try to enable wifi, check dmesg and logcat as they will let u know the reason why. But the above two should be checked.
I checked all of these values in the sys.tar and they were all tiwlan... But the Update.tar had all the correct ones. So I didn't make any changes since the update.tar comes second. Still a no go with WIFI. Data either... (Maybe they have something in common?)

My dmesg says wifi was loaded. This is what my dmesg says once I try turn on wifi:
Code:
[  129.991943] bcm4329: version magic '2.6.27.46-01238-ge739b29-dirty preempt mod_unload ARMv6 ' should be '2.6.27.46-01238-ge739b29 preempt mod_unload ARMv6 '
__________________
Reply With Quote
This post has been thanked 1 times.