View Single Post
  #992 (permalink)  
Old 01-31-2011, 08:25 PM
Lmiller1708's Avatar
Lmiller1708
Flashaholic!
Offline
Location: La Crosse, WI
 
Join Date: Aug 2008
Posts: 873
Reputation: 2160
Lmiller1708 is a VIPLmiller1708 is a VIPLmiller1708 is a VIPLmiller1708 is a VIPLmiller1708 is a VIPLmiller1708 is a VIPLmiller1708 is a VIPLmiller1708 is a VIPLmiller1708 is a VIPLmiller1708 is a VIPLmiller1708 is a VIP
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Re: NAND Boot Testing - 01-07: Panel power on/off fixes

Quote:
Originally Posted by natemcnutty View Post
I've got about 12 different USB cables that I've tried, including the special ones with 2x USB to 1x mini-USB connector (for powering laptop drives that exceed 500ma). I have three original HTC cables that came with the phone (and two others at work that are the same). Sadly, none of them work.

Wish it were that simple. I've used canned air as well as a plastic brush we commonly use to clean the fans on servers. It looks perfectly clean in there, so my thought is it must be the connector to the board or something wrong with the bootloader itself. Sadly, I can't re-flash HSPL since I have no USB...
Ok... Just checking, you never know.
It does sound like a hardware issue!
Sounds like it is time to take it apart and check the solder connections. I had to do that do my Vogue to fix the Speaker... It wasn't too bad at all. If you can't find a star bit just find a small enough standard that will fit.
Good luck! (If you want too that is!)
__________________
Reply With Quote
This post has been thanked 1 times.