[mpannen]

I aplogize but I have no experience using logcat or any debugging experience in android. I connected to my device and executed 'logcat'

I also did the same but used 'dmesg'


Here is what I got back when I tried to power on the screen:
Is any of this useful, or can I provide any useful info with this tool?

logcat:

D/KeyguardViewMediator( 1273): wakeWhenReadyLocked(3)
D/KeyguardViewMediator( 1273): handleWakeWhenReady(3)
D/KeyguardViewMediator( 1273): pokeWakelock(5000)
I/power ( 1273): *** set_screen_state 1
D/Sensors ( 1273): sensors activate returing 1
D/lights ( 1273): Setting brightnessMode=0 brightness=6
D/lights ( 1273): Setting brightnessMode=0 brightness=13
D/lights ( 1273): Setting brightnessMode=0 brightness=20
D/lights ( 1273): Setting brightnessMode=0 brightness=27
D/lights ( 1273): Setting brightnessMode=0 brightness=34
D/lights ( 1273): Setting brightnessMode=0 brightness=40
D/lights ( 1273): Setting brightnessMode=0 brightness=47
D/lights ( 1273): Setting brightnessMode=0 brightness=54
D/lights ( 1273): Setting brightnessMode=0 brightness=61
D/lights ( 1273): Setting brightnessMode=0 brightness=68
D/lights ( 1273): Setting brightnessMode=0 brightness=74
D/lights ( 1273): Setting brightnessMode=0 brightness=81
D/lights ( 1273): Setting brightnessMode=0 brightness=88
D/lights ( 1273): Setting brightnessMode=0 brightness=95
D/lights ( 1273): Setting brightnessMode=0 brightness=102
D/lights ( 1273): Setting brightnessMode=0 brightness=95
D/lights ( 1273): Setting brightnessMode=0 brightness=88
D/lights ( 1273): Setting brightnessMode=0 brightness=81
D/lights ( 1273): Setting brightnessMode=0 brightness=74
D/lights ( 1273): Setting brightnessMode=0 brightness=67
D/lights ( 1273): Setting brightnessMode=0 brightness=61
D/lights ( 1273): Setting brightnessMode=0 brightness=54
D/lights ( 1273): Setting brightnessMode=0 brightness=47
D/lights ( 1273): Setting brightnessMode=0 brightness=40
D/lights ( 1273): Setting brightnessMode=0 brightness=33
D/lights ( 1273): Setting brightnessMode=0 brightness=27
D/lights ( 1273): Setting brightnessMode=0 brightness=20
D/lights ( 1273): Setting brightnessMode=0 brightness=13
D/lights ( 1273): Setting brightnessMode=0 brightness=6
D/lights ( 1273): Setting brightnessMode=0 brightness=0
I/power ( 1273): *** set_screen_state 0
D/Sensors ( 1273): sensors activate returing 1
W/BatteryStatsImpl( 1273): Couldn't get kernel wake lock stats
E/Tethering( 1273): attempting to remove unknown iface (usb0), ignoring
D/dalvikvm( 1390): GC_EXPLICIT freed 369 objects / 15848 bytes in 130ms
W/BatteryStatsImpl( 1273): Couldn't get kernel wake lock stats


dmesg:

[ 1369.269317] request_suspend_state: wakeup (3->0) at 1334350000000 (2010-12-31 17:15:44.170000000 UTC)
[ 1369.269500] htc_pwrsink: ID 0, Util 38%, Total 38000 uA
[ 1369.269531] novtec_resume
[ 1369.269622] htcrhod_mddi_power_client (on)
[ 1369.276123] microp-klt: Setting lcd-backlight brightness2 to: 0/10
[ 1369.276763] msm_i2c msm_i2c.0: error, status 63c8
[ 1369.276855] msm_i2c msm_i2c.0: Error during data xfer (-5)
[ 1369.294860] micropklt, i2c write retry
[ 1369.294982] mddi_resumed
[ 1369.386718] microp-klt: Setting lcd-backlight brightness2 to: 0/10
[ 1369.406097] hw3d_late_resume: resuming
[ 1369.406188] tssc_manager_resume(): ts->use_irq=1
[ 1369.406249] Sending arm9_low_speed 7
[ 1369.416442] microp-klt: Setting lcd-backlight brightness2 to: 0/10
[ 1369.456726] microp-klt: Setting lcd-backlight brightness2 to: 0/10
[ 1369.476898] microp-klt: Setting lcd-backlight brightness2 to: 1/10
[ 1369.485870] novtec_unblank
[ 1369.486297] micropklt_panel_resume
[ 1369.510498] microp-klt: Setting lcd-backlight brightness2 to: 1/10
[ 1369.527313] microp-klt: Setting lcd-backlight brightness2 to: 1/10
[ 1369.547821] microp-klt: Setting lcd-backlight brightness2 to: 1/10
[ 1369.568511] microp-klt: Setting lcd-backlight brightness2 to: 2/10
[ 1369.589080] microp-klt: Setting lcd-backlight brightness2 to: 2/10
[ 1369.609680] microp-klt: Setting lcd-backlight brightness2 to: 2/10
[ 1369.630310] microp-klt: Setting lcd-backlight brightness2 to: 2/10
[ 1369.650939] microp-klt: Setting lcd-backlight brightness2 to: 3/10
[ 1369.671478] microp-klt: Setting lcd-backlight brightness2 to: 3/10
[ 1369.692108] microp-klt: Setting lcd-backlight brightness2 to: 3/10
[ 1374.378448] microp-klt: Setting lcd-backlight brightness2 to: 3/10
[ 1374.397247] microp-klt: Setting lcd-backlight brightness2 to: 3/10
[ 1374.417816] microp-klt: Setting lcd-backlight brightness2 to: 2/10
[ 1374.437927] microp-klt: Setting lcd-backlight brightness2 to: 2/10
[ 1374.458343] microp-klt: Setting lcd-backlight brightness2 to: 2/10
[ 1374.478759] microp-klt: Setting lcd-backlight brightness2 to: 2/10
[ 1374.499176] microp-klt: Setting lcd-backlight brightness2 to: 1/10
[ 1374.519622] microp-klt: Setting lcd-backlight brightness2 to: 1/10
[ 1374.539886] microp-klt: Setting lcd-backlight brightness2 to: 1/10
[ 1374.560272] microp-klt: Setting lcd-backlight brightness2 to: 1/10
[ 1374.580841] microp-klt: Setting lcd-backlight brightness2 to: 0/10
[ 1374.601104] microp-klt: Setting lcd-backlight brightness2 to: 0/10
[ 1374.621582] microp-klt: Setting lcd-backlight brightness2 to: 0/10
[ 1374.641601] microp-klt: Setting lcd-backlight brightness2 to: 0/10
[ 1374.661712] microp-klt: Setting lcd-backlight brightness2 to: 0/10
[ 1374.682037] request_suspend_state: sleep (0->3) at 1339670000000 (2010-12-31 17:15:49.490000000 UTC)
[ 1374.682159] Sending arm9_low_speed 2
[ 1374.702117] novtec_blank
[ 1374.702209] micropklt_panel_suspend
[ 1374.842163] novtec_suspend
[ 1374.913513] htcrhod_mddi_power_client (off)
[ 1374.942718] mddi_suspended
[ 1374.942749] htc_pwrsink: ID 0, Util 7%, Total 7000 uA
[ 1374.952392] active wake lock PowerManagerService
[ 1374.952423] active wake lock vbus_present