Quote:
Originally Posted by dja2k
This new builds are coming out like hot pancakes. Okay if I already have a working v2.2 EXT4, what steps do I have to take just to update to v2.3 EXT4? I would figure:
18 ) Run Quick Boot and select Recovery to boot back into Clockwork.
19) This should put you back in clockwork version ending in .2 not .0. Wipe Data 3 times, then Cache 3 Times, then Dalvick 3 times.
20) Flash midNIGHT v2.3 EXT4.zip. Don't reboot. Clear Cache 3 Times, and Dalvick 3 times. DO NOT WIPE DATA.
21) Flash the KERN-DK28EXT4.zip file again.
22) Reboot, and you have a working midnight ROM with working GPS locks. If you use themes/Nexus S wallpapers/anything you need to flash. Boot into the ROM once to let everything set up, then use Quickboot to get back to Clockwork and flash your themes.
Can anyone confirm this... thanks!
dja2k
|
This is what I did from having v2.2 EXT4 to updating to v2.3 EXT4...
1) Run Quick Boot and select Recovery to boot back into Clockwork.
This should put me back in clockwork version ending in .2 not .0.
2) Ran a ClockWorkMod Backup
3) Wiped Cache 3 Times
4) Wiped Dalvick 3 times
5) Flashed midNIGHT v2.3 EXT4.zip (Didn't reboot yet)
6) Wiped Cache 3 Times (for good measure)
7) Wiped Dalvick 3 times (for good measure)
Rebooted
Note:
1) Did NOT Wipe Data
2) Did not re-flash DK28-EXT4Kernel-FINAL (already had it on my epic so figured I didn't need to re-flash it)
Everything came up perfect - no issues!!!
FYI, the booting up process took a bit longer than I was expecting so I started to worry but then "BAM" - up she started! (so don't panic)