Help... I unlocked phone using 2.40 olipro, flashed NexVision's latest (based on DCD 2.31), flashed the 3.27 radio, and booted up fine. I then set MDN and MSID. On reboot my device won't stop rebooting. I can get into the boot loader but on a "normal boot" the OS never starts and just auto reboots. I am trying to revert, but relocker requires the phone to have a running OS. How do I relock and revert to 2.17/1.32 radio without a running OS on the phone? I tried reflashing Nexvision and 3.27 radio and 2.40 bootloader with no change. I also tried flashing 3.16 beta. That only changed the splash screen to HTC Test Only.
I also tried flashing from SD with no change. Is there any way I can setup the SD card to get the bootloader to execute the relocker batch? Any help is greatly appreciated.
UPDATE: I resolved my problem. I flashed the stock 2.17 rom from SD card and to my surprise it worked. I would still like an answer to my question though. Since it cannot be repeated enough, I will include instructions for flashing from SD card.
1) Format your Micro SD card Fat32 using a MicroSD card reader. Most are FAT16 be default. FAT16 will NOT work.
2) Make a backup copy of the rom you want to flash and rename it to "TITAIMG.NBH" w/o the quotes.
3) Copy TITAIMG.NBH to the root directory on the MicroSD card using a MicroSD card reader, NOT another phone using ActiveSync. ActiveSync will corrupt the file when copying to the card.
4) Safely remove the MicroSD card reader and put the MicroSD card into your powered down phone (battery removed).
5) Put the battery back in and push the Power ON + Camera + Reset buttons all at the same time. Remove the stylus from the Reset button first, then release the other two buttons. Doing this properly is a pain in the butt.
6) The phone should come up in a grey screen and tell you to push the power button to load the rom. Push the Power ON button and wait until the screen shows that the rom loaded SUCCEEDED.
7) Eject the MicroSD card from the phone and hit the reset button using the stylus.
Done
I much prefer this method to flashing via USB cable since there is much less that can go wrong.
Good luck
Will