Guys just so you know, BRICKED does not mean doesn't work properly or has issues. Bricked means the phone is physically dead! Won't go into bootloader mode or show the initial screen in any way.
It is very RARE for this to happen but it usually happens when you have flashed something in a very horrible manner such as stopped a radio update or rom flash in midstream.
But even in those cases Bricking is pretty rare.
To check if your phone is bricked simply try to go into bootloader mode:
HOLD POWER + VOL DOWN and reset with the stylus.
If you get the multicolor boot screen your not bricked. Try reflashing the phone in that case.
Also make sure you read the specs and target device for your phone. Flashing a rom for a TP2 on a TP is a good way to actually brick your phone!
Flashing a GSM rom on a CDMA phone is another.
As long as your screw up allows you to get to the bootloader screen your phone is NOT BRICKED!
Quote:
|
How can i re flash the whole system if it's possible i think i flashed 6.5 gsm by error. Is my phone a paper weight now.
|
DO the steps outlined above, if you get to the bootloader (likely since you get the initial boot screen) and try flashing the stock ROM from your carrier and device. This can sometimes clear out the device from any bad crap.
If that works go find a better ROM that will work for your device and try flashing again.
But if you think you flashed a GSM ROM you have to be careful because thats the type of thing that does lead to bricking a phone.