Quote:
Originally Posted by arrrghhh
Whew that took all my google-fu and then some, sheesh 
Code:
Welcome, this is HaRET pre-0.5.3-20101101_214046 running on WindowsCE v5.2
Minimal virtual address: 0x10000, maximal virtual address: 0x7fffffff
Detected machine Generic ARM v6/generic (Plat='PocketPC' OEM='T7380')
CPU is ARM ARM arch 6 stepping 2 running in system mode
Enter 'HELP' for a short command summary.
HaRET(1)# dump speedpoop
PLL[0] frequency = 230 MHz
PLL[1] frequency = 960 MHz
PLL[2] frequency = 1056 MHz
PLL[3] frequency = 192 MHz
Information for PMDH
ROOT_ENA = 1
CLK_INV = 0
CLK_BRANCH_ENA = 1
SRC_DIV = 4
SRC_SEL = global PLL
Information for USBH
ROOT_ENA = 0
CLK_INV = 0
CLK_BRANCH_ENA = 0
SRC_DIV = 0
SRC_SEL = TCXO
|
fak.. this makes no sense. according to this both you and nate are running on clocks similar to Raph. But thats not the case.
On haret, can you run
pd 0xA8600000 0x400
that will dump a table of all the clocks. I dumped my clocks back in the days and put it on the wiki here
MSM CLK - Htc-linux.