Quote:
Originally Posted by samster86  it is how I got my apps2sd to work.
(note: do this at your own risk)
1. BACK UP YOUR MEMORY CARD TO YOUR COMPUTER
2. Using AmonRa's recovery
3. Boot into recovery mode
4. Select Partition SD card
4. Set: 512 Ext: 1024
5. let it finish select SD:ext2 to ext3
6. go back to usb-ms toggle
7. Put all your stuff back on your memory card now
8. I went to Wipe data/factory reset then wipe cache, wipe Dalvik-cache and finally wipe SD:ext partition.
9. Then flash the rom and let it boot all the way up
10. Reboot into Recovery
11. Flash Kings bfs 9 kernal
12. reboot
13. connect usb to phone and using adb type
"adb shell"
then
"/system/bin/a2sd check"
you should see some properties
scroll down and look to see if dalvik cache is run on sd card if not type
"a2sd cachesd"
the phone will reboot by itself
once again using adb type
"adb shell"
then
"/system/bin/a2sd check"
make sure dalvik cache is now running on sdcard
also check to see if Zipalign is set to boot if not type
"a2sd zipalign"
|
Fellas,
I first used the above procedure with Myn's Warm2.2 rom to partition my SD and move apps 2 sd. After that it seems that my ROM's have been unstable. So I switched back to OMJ 3.8 and it is also unstable. It seems to hang and require battery-pull frequently. Is this common for Darktremor's apps2sd?