Quote:
Originally Posted by Recursion
806.4
interval 1500ms
steps 5
load max 30
load min 15
jump max 35
jump min 35
Running Vin's 8.14 Pluto CHT 8016 ... and ROM is very OC-friendly. My max OC increased, and now polling at 1500 is stable.
|
Very interesting settings.
To my understanding, Load Max/Min means that reach load max/min percentage the clock will be stepped to max/min speed. Jump max/min means the clock will jump to max/min when reach the cpu usage percentage. Set to jump max/min at 35 will just bypass the load min, either go max clock when sampled result is above 35% or go min clock when is below 35%.
BTW, the min speed will increase when I increase the max clock speed. I saw sb. posted to set min clock at 30MHz, but don't know how.
Edit: OK, I figured that out, by setting the steps you can get min clock to be lower. Now I set at 729.6Mhz, steps 15 load 3|10-45|50%and the min clock went to 45.6Mhz. BTW, I don't see it give me any benefit, feel slower. Might help on battery life. But I won't recommend setting up too many steps, might just make system more unstable because it tries to change the clock speed too frequently?(through all the steps)