Quote:
Originally Posted by vin255764
it works fine,they just have to add 1 reg to fix it
|
Cool...
Vin, any thoughts on cooking OC?
Here's a nice write-up for auto_OC below (and can be found
here).
/*
nayr1482:
OK...so here is a run down of what each of the screens do in the GUI
1) Would you like Safe Mode Enabled? (Yes go to 2, No go to 5)
2) Select New Safe Mode Speed, this is the speed your phone will boot at if Safe Mode is Enabled
3) Select New Safe Mode Duration, this is how long your phone will remain at Safe Mode Speed once booted
4) Review of Safe Mode Selections - Apply these Settings? (Yes, saves your new selections, No exits the program without saving)
5) Select New Speed, this is the Speed your CPU will be set to run at (the overclocked speed) during normal operation
6) Select New Throttle Speed, this is the speed your CPU will be set to run while the Backlight is OFF, while you are on a phone call, or while the Lockscreen is on. Recommend using 604mhz as Netripper dubbed this the "safe speed"
7) Select New Poll Interval, this is how long between checks (checking if your backlight is OFF, if you are on the phone, or if your lockscreen is on). The lower the number the more often it checks - but the more CPU you consume. I recommend 1000 or 1200 (i have never had an SOD with these values)
8 ) Review of CPU Selections - Apply these Settings? (Yes, saves your new selections and restarts your phone, No exits the program without saving)
As always...
1) Need Netripper's v2 OC application installed in the DEFAULT location (on device)
2) Need MortScript installed
3) Place files from OC_Auto zip in the root of your storage card
4) Create shortcut to OC_Auto.mscr in your /windows/startup folder
5) *Optional, if you want the GUI to show up in your programs list create a shortcut to OC_Auto_GUI.mscr in your /windows/start menu folder
6) Run the GUI, pick your settings.
*/
Netripper's OC v2 is
here.
OC_Auto 4.2 is
here.
Main info
here.