Quote:
Originally Posted by cree
You are correct I do have sprint. I have done the provisioning and everything. The Ev is on the top but my data still doesn't work.
|
I can help you, I had this issue. I had to fix the provisioning (default) profile on ##778# (or ##3424# and using QPST.) I had to use the stock Sprint ROM and let it provision, THEN I installed the NRG ROM.
Using EPST (##778#)
If you already have NRG ROM with Total Commander locate EPST.LNK, run it and select EDIT. It will then ask you for your MSL (6 digits) enter it and then select VIEW INFO, M.IP DEFAULT PROFILE.
Using DIAGNOSTIC (##3424#)
If you already have NRG ROM with Total Commander locate DMROUTER.EXE in \WINDOWS, select it, then hit SHOW, >>>>>, CREATE SHORTCUT. After you create shortcut, press and hold the shortcut created and select PROPERTIES, then go to SHORTCUT tab and in TARGET: after "\Windows\DMRouter.exe" type /DIAG then run it, this will enable the Diagnostic Port mode to use QPST. Run SERVICE PROGRAMMING and select your phone, enter you SPC (MSL) and then select READ FROM PHONE. After you READ FROM PHONE, go to the M.IP tab and select the 1st profile (0)
Here are the settings for the Default Profile:
Enable Profile: Enable
NAI: (HEX MEID)@hcm.sprintpcs.com
MN HA SPI Set: Enable
MN HA SPI Value: 4D2 (hex)
MN AAA SPI Set: Enable
MN AAA SPI Value: 4D2 (hex)
Reverse Tunneling Prefer: Enable
Home Address: 0.0.0.0
Primary HA Address: 68.28.15.12
Secondary HA Address: 68.28.31.12
HA Shared Secret: secret (on QPST you have to select ENTER TEXT STRING)
AAA Shared Secret: (do not change this, you should have your own set)
DMU public key (PKOID): 0
MN Authenticator: 0
Also make sure under M.IP SETTINGS you have ACTIVE USER PROFILE INDEX set to 0 (so it can provision) this will change to 1 after it provisions.
On EPST select MENU, then OK until the phone reboots. On QPST press WRITE TO PHONE and reboot phone manually.
After you provision, go back in EPST and locate M.IP CUSTOMER PROFILE 1 and write down the information, this is what changes when you provision. Most important your NAI (username) and your AAA password (6 digits)
