[MB-WI]

I have a fix for this!

It is a hardware fix, but it works, and more importantly (for me anyways) it confirmed that 100% of my Align Screen issues were from this "feature".

Here is the fix:
1. Remove the battery cover, and carefully remove the volume button assembly from the rest of the cover by removing the tops of the 2 melted plastic pins. (I spun a small drill bit with my fingers)

2. Take a piece of fine wet/dry sandpaper and tape it to something flat. Put a little water on it, and sand down the buttons so that they are slightly recessed to the battery cover when held back in place.

3. Reinstall the volume button assembly, with a drop of glue on each plastic pin, or re-melt the plastic pins to secure.

This allows you to still easily adjust the volume, but makes it much harder to hit both of them accidentally as you can feel the hole in the battery cover if you are touching it there when taking it out of the case!

Hope this helps!