In case you had trouble parsing that:
Code:
active wake lock vbus_present
[ 201.143768] wake lock mmc_delayed_work, expired
[ 201.143798] wake lock SMD_DIAG, expired
[ 201.143798] wake lock SMD_DS, expired
[ 216.321624] request_suspend_state: wakeup (3->0) at 211470000000 (2010-06-15 17:48:41.150000000 UTC)
[ 216.321807] htc_pwrsink: ID 0, Util 38%, Total 38000 uA
[ 216.321868] epson_resume
[ 216.321899] msmfb: panel waking
[ 216.321929] msmfb: ready, waiting for full update
[ 216.321990] hw3d_late_resume: resuming
[ 216.322052] tssc_manager_resume(): ts->use_irq=1
[ 216.322113] Sending arm9_low_speed 7
[ 216.326477] microp-klt: Setting lcd-backlight brightness to: 0x00
[ 216.343078] microp-klt: Setting lcd-backlight brightness to: 0x00
[ 216.359527] microp-klt: Setting lcd-backlight brightness to: 0x00
[ 216.388092] microp-klt: Setting lcd-backlight brightness to: 0x00
[ 216.468017] microp-klt: Setting lcd-backlight brightness to: 0x10
[ 216.508697] microp-klt: Setting lcd-backlight brightness to: 0x10
[ 216.538177] msmfb: full update starting
[ 216.548736] microp-klt: Setting lcd-backlight brightness to: 0x10
[ 216.559326] microp-klt: Setting lcd-backlight brightness to: 0x10
[ 216.579101] microp-klt: Setting lcd-backlight brightness to: 0x10
[ 216.588714] fake vsync
[ 216.588775] msmfb_start_dma 60.000 ms after vsync request
[ 216.599639] microp-klt: Setting lcd-backlight brightness to: 0x20
[ 216.619323] microp-klt: Setting lcd-backlight brightness to: 0x20
[ 216.619598] msmfb: full update completed
[ 216.619689] msmfb: turning on panel
[ 216.619689] epson_unblank
[ 216.620452] rev: got reg 0 = 0 for wrong register, expected 150000
[ 216.639343] microp-klt: Setting lcd-backlight brightness to: 0x20
[ 216.659515] microp-klt: Setting lcd-backlight brightness to: 0x20
[ 216.679473] microp-klt: Setting lcd-backlight brightness to: 0x20
[ 216.699523] microp-klt: Setting lcd-backlight brightness to: 0x30
[ 216.719177] mddi_remote_read(150000) timeout (-1 0 0)
[ 216.719238] mddi_remote_read: failed, sent MDDI_CMD_SEND_RTD: int 23a001, stat 800061, rtd val f curr_rev_ptr 251fa03c
[ 216.719818] rev: got reg 0 = 0 for wrong register, expected 150000
[ 216.819244] mddi_remote_read(150000) timeout (-1 -1 0)
[ 216.819305] mddi_remote_read: failed, sent MDDI_CMD_SEND_RTD: int 23a001, stat 800061, rtd val f curr_rev_ptr 251fa050
[ 216.819793] rev: got reg 0 = 0 for wrong register, expected 150000
[ 216.919403] mddi_remote_read(150000) timeout (-1 -1 0)
[ 216.919494] mddi_remote_read: failed, sent MDDI_CMD_SEND_RTD: int 23a001, stat 800061, rtd val f curr_rev_ptr 251fa064
[ 216.919586] init hitachi panel
[ 216.919616] msmfb: panel awake
[ 493.329986] microp-klt: Setting lcd-backlight brightness to: 0x30
[ 493.349029] microp-klt: Setting lcd-backlight brightness to: 0x20
[ 493.369049] microp-klt: Setting lcd-backlight brightness to: 0x20
[ 493.389160] microp-klt: Setting lcd-backlight brightness to: 0x20
[ 493.409423] microp-klt: Setting lcd-backlight brightness to: 0x20
[ 493.429321] microp-klt: Setting lcd-backlight brightness to: 0x20
[ 493.449432] microp-klt: Setting lcd-backlight brightness to: 0x20
[ 493.469482] microp-klt: Setting lcd-backlight brightness to: 0x20
[ 493.489501] microp-klt: Setting lcd-backlight brightness to: 0x10
[ 493.509521] microp-klt: Setting lcd-backlight brightness to: 0x10
[ 493.529571] microp-klt: Setting lcd-backlight brightness to: 0x10
[ 493.549804] microp-klt: Setting lcd-backlight brightness to: 0x10
[ 493.569976] microp-klt: Setting lcd-backlight brightness to: 0x10
[ 493.590515] microp-klt: Setting lcd-backlight brightness to: 0x10
[ 493.609985] microp-klt: Setting lcd-backlight brightness to: 0x10
[ 493.630065] microp-klt: Setting lcd-backlight brightness to: 0x00
[ 493.650146] microp-klt: Setting lcd-backlight brightness to: 0x00
[ 493.670257] microp-klt: Setting lcd-backlight brightness to: 0x00
[ 500.353454] microp-klt: Setting lcd-backlight brightness to: 0x00
[ 500.372528] microp-klt: Setting lcd-backlight brightness to: 0x00
[ 500.392883] microp-klt: Setting lcd-backlight brightness to: 0x00
[ 500.412780] microp-klt: Setting lcd-backlight brightness to: 0x00
[ 500.414855] request_suspend_state: sleep (0->3) at 494820000000 (2010-06-15 17:53:24.500000000 UTC)
[ 500.486694] Sending arm9_low_speed 2
[ 500.486968] msmfb: panel sleeping
[ 500.517913] epson_blank
[ 500.518585] rev: got reg 0 = 0 for wrong register, expected 150000
[ 500.613342] mddi_remote_read(150000) timeout (-1 -712176016 0)
[ 500.613433] mddi_remote_read: failed, sent MDDI_CMD_SEND_RTD: int 23a001, stat 800061, rtd val f curr_rev_ptr 251fa078
[ 500.613555] rev: got reg 0 = 0 for wrong register, expected 150000
[ 500.713409] mddi_remote_read(150000) timeout (-1 -1 0)
[ 500.713470] mddi_remote_read: failed, sent MDDI_CMD_SEND_RTD: int 23a001, stat 800061, rtd val f curr_rev_ptr 251fa08c
[ 500.714172] rev: got reg 0 = 0 for wrong register, expected 150000
[ 500.813629] mddi_remote_read(150000) timeout (-1 -1 0)
[ 500.813751] mddi_remote_read: failed, sent MDDI_CMD_SEND_RTD: int 23a001, stat 800061, rtd val f curr_rev_ptr 251fa0a0
[ 500.813873] deinit epson panel
[ 500.813964] epson_suspend
[ 500.814025] htc_pwrsink: ID 0, Util 7%, Total 7000 uA
[ 500.818481] active wake lock vbus_present
[ 500.818542] wake lock mmc_delayed_work, expired
[ 500.818572] wake lock SMD_DIAG, expired
[ 500.818634] wake lock SMD_DS, expired
[ 656.985351] request_suspend_state: wakeup (3->0) at 651170000000 (2010-06-15 17:56:01.710000000 UTC)
[ 656.985565] htc_pwrsink: ID 0, Util 38%, Total 38000 uA
[ 656.985595] epson_resume
[ 656.985656] msmfb: panel waking
[ 656.985687] msmfb: ready, waiting for full update
[ 656.985748] hw3d_late_resume: resuming