okay my dial/green button got stuck last night and i have attempted to fix it with some tape and super glue. (no warranty
).. i dont have a camera so im going to try and explain what i did to fix it.
Things you will need,
Tweezer
Super Glue
Scotch tape, What i used was Nexcare Flexible Clear Transpore Surgical Tape.
Grab some tape with some thickness.
Sharp nose scissors
Pin Needle
and a little patience
Okay First thing i did is remove the button from the phone, Be careful when removing button so that you do not lose the clear white circle that pushes the actual button in. Attached to the button there will be a white ish rubber be sure to keep as much as this rubber attached with the button. (the white part)
Any white part that is left attached around the [+] button cut it away to the black rim.
Now cut the excess rubber on the edges of the removed button of so there is nothing hainging off the button. If the white rubber is still stuck on the back of the removed button leave it there, or it wont sit flush with the other buttons once stuck back on.
Okay now examine the mini push button on the phone.. It should look like this
|LED [+] LED| Now grab your super glue, pin needle, and clear circle that you found/removed safely.
put a drop of glue on a piece of paper and dip the needle in it and then rub some glue on the [+] button, (VERY little just to hold the clear circle in place, bc you dont want it to glue the button in the stuck down position. Then quickly drop the clear circle thingy on top of the [+] Button. Center it as good as you possibly can. Let dry for 5 min before continuing.
Then cut 2 square pieces of tape about the size of 3mmx3mm, to paste over the 2 LEDs on both sides of the [+] Button. ex: (|TP[+]TP|) Then Drop some glue on both pieces of Tape and press the removed button on top of it all. DO NOT GLUE THE TAPE TO THE LED! Let dry for 3 min.
And your button will be fixed! if the button does not click as it used to make your tape used wasnt thick enough. what you can do is, before you glue the button on just rest it on there and test it to see if it clicks.
Rep Me.
Let me know if you have any questions!
