Quote:
Originally Posted by jwoolz48
I swapped housing a few times on my white VZW Touch. This was the best set of instructions I could find.
Here it is translated if you need it... http://translate.google.com/translat...&sl=auto&tl=en
I used the black Sprint housing for the majority of the time I had my Touch. I was able to get the Sprint branded digitizer off and put the VZW one on. It is held in place with double-sided tape. After taking the phone apart, I twisted the top of the front housing till I could get my fingernail in between the housing and the corner of the digitizer to pull it loose. It is a little bit thicker than a US .25 cent quarter. I ran my nail along the top and two sides very slowly while pushing the digitizer slightly from the back. There is a ribbon at the bottom of the digitizer. Work slowly so it does not rip loose.
Agree with MrGoodtunes... give yourself plenty of time and pay attention. It has been a little while since I've swapped but feel free to post any questions. I'd be happy to help.
EDIT: One more thought... be careful about what housing you buy. I don't think the GSM housings will fit. Something with the camera... |
I ordered mines on Wednesday so it should be some time next week. And the diff between the GSM and CDMA is that the camera mirror is at 12 o'clock on the GSM and 11 o'clock in the GSM