Here is how to do this:
Upgrade your PRL file to the latest from
http://www.corolada.com/prl/ navigate to metropcs and choose file 00024.
If you dont know how to do the upgrade then here is how:
Put the file you just downloaded anywehere in the device or the storage card.
1- dial ##778#
2- Press Edit
3- Enter 000000
4- Click on viewinfo on the lower left and choose PRL
5- right click on prl upgrade file (press and hold = right click) then press edit
6- Browse for the file you just put in your mobile then finish the upgrade and reset the device.
7- make a call after the device reboot
8- you will need to redo the wap and mms
WAP
1: Download Dot Fred's Task Manager and goto services. Stop the CM_Guardian. Then Highlight it and find it in the registry. Once in the Registry highlight CM_Guardian and remove the complete directory.
NOTE: This file is what resets your Sprint connection to its default settings despite editing these settings. Disabling this file by deleting or replacing it is critical.
2: Then soft Reset.
3: Open your phone and enter ##778#, select "EDIT" and enter your unlock code.
4: Set the following values:
M.IP Settings:
MIP_MODE = Simple IP Only
M.IP Default Profile:
NAI =
yourtendigitphonenumber@mymetropcs.com
Home Address =
0.0.0.0 (just delete the values and save)
Primary HA Address =
0.0.0.0 (just delete the values and save)
Secondary HA Address =
0.0.0.0 (just delete the values and save)
5: Goto Connections and delete any existing connections and setup a new one using the following settings:
Number to dial = #777
Username:
yourtendigitphonenumber@mymetropcs.com
Password: metropcs
Domain: (Leave Blank)
Select Proxy Settings and enter the following values:
wap.metropcs.net port:3128 (http)
wap.metropcs.net port:3128 (wap)
wap.metropcs.net port:443 (secure wap)
wap.metropcs.net port:3128 (socks)
6: Back in the "Connections" screen where you have two tabs at the bottom of the screen of "Tasks" and "Advanced", go to Advanced, click on "Select Networks" and select the name of the connection you just setup.
Example if you leave as Sprint then choose that one as your
internet connection and do it for both settings.
MMS
1. MAKE SURE YOUR WEB IS WORKING PROPERLY (ABOVE INSTRUCTIONS) AS YOU CAN'T HAVE MMS WITHOUT WORKING INTERNET!!!!!
1a: Using a registry editor goto HKLM/SOFTWARE/Arcsoft/Arcsoft MMS/UA/Config/UI
Find EnableServerEdit and change it to "1"
2: Open your Messaging and click on the SMS/MMS option.
3: Click on "Menu" and select "MMS Options" then select the "CDMA Servers" tab.
4: Add a new server with the following settings:
Server Name: metropcs
Gateway: wap.metropcs.net
Port number: 3128
Server address: http://mms.metropcs.net:3128/mmsc
Connect via: SELECT THE CONNECTION YOU SETUP ABOVE
Send limit: 500K
5: Click "Done" and then set the new server as default.
6: Using a Registry Editor edit the following values:
[HKEY_LOCAL_MACHINE\SOFTWARE\Arcsoft\ArcSoft MMS UA\Config\mm1\WspHeader2]
ADD STRING -> "X-metropcs-MDN"="XXXXXXXXXX"
( Insert your 10 digit phone Number )
ADD STRING -> "X-DEVICE-MIN"="1XXXXXXXXXX"
( Insert your 10 digit phone Number WITH the 1 in front of it )
7: Hit the thanks button!
It's hard typing all this stuff. Mods may want to sticky this.
Voila! Now wasn't that so simple? If you have the touch pro it's almost the same. Just make sure you have someone to MetroFlash it that is an Authorized MetroPCS Reseller and that they know how to flash the Touch or the Touch Pro or Diamond or Mogul.... etc.
There is a final step... There is a service on the phone called CM_Guardian that is continuously resetting your connection to Sprint settings. Remove this. Sorry, meant to put that in the walkthrough. I believe To do this, set the following key in the registry:
HKLM\Services\CMGuardian
Flags = 4 (it's a DWORD if it doesn't exist.)