Thread: Hspl 2 is out
View Single Post
  #1 (permalink)  
Old 03-23-2010, 07:45 AM
maxtcee's Avatar
maxtcee
WHERES THE BOTTLES!!
Offline
Location: East Coast
 
Join Date: Jan 2009
Posts: 1,825
Reputation: 4460
maxtcee should be added to the payroll for their contributionsmaxtcee should be added to the payroll for their contributionsmaxtcee should be added to the payroll for their contributionsmaxtcee should be added to the payroll for their contributionsmaxtcee should be added to the payroll for their contributionsmaxtcee should be added to the payroll for their contributionsmaxtcee should be added to the payroll for their contributionsmaxtcee should be added to the payroll for their contributionsmaxtcee should be added to the payroll for their contributionsmaxtcee should be added to the payroll for their contributionsmaxtcee should be added to the payroll for their contributions
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Hspl 2 is out

DOES THIS MEAN YOU CAN USE IT ON US VERSION?

Join Date: Mar 2008
Posts: 4,383




[TUT] Flashing your First GSM LEO Rom !!NOW WITH HARDSPL2!! (For Noobs)
PLEASE READ THE *FAQ* BEFORE ASKING QUESTIONS OR LOOK AT *THIS* THREAD THANKS TO RZASHARP

ALSO DEFINITELY CHECK OUT THE COMPLETE VIDEO GUIDE TO EVERYTHING *HERE* THANKS TO [★]

Before starting, backup anything you might want to keep after the new Rom has been flashed as all contacts, emails, texts, notes, Internet BookMarks WILL be lost!!

PimBackup is good and free (copy any mms attachments to your storage card or computer seperately)

*ONCE YOU HAVE FLASHED A HARDSPL ITS PERMANENT. YOU DONT NEED TO DO IT AGAIN WHEN FLASHING NEW ROMS OR RADIOS*

*DO NOT start another process while the flashing process is taking place*
*DO NOT click off of the status bar... Let it stay in the foreground*
*DO NOT let the Screensaver activate*

Any of these can lead to a bad flash and possibly brick your phone

*FLASH HARDSPL BEFORE FLASHING ANY CUSTOM ROMS OR RADIOS*

1. YOUR DEVICE MUST HAVE AT LEAST 50% BATTERY POWER FIRST BEFORE ATTEMPTING EACH STAGE

--------------------------------------------------------------

2. FLASH HARDSPL (REQUIRED!! DO THIS BEFORE ANYTHING ELSE)

The Original HardSPL Thread is *HERE*


1024LEOs (from T-Mobile with 1024ROM) ARE NOT SUPPORTED BY HARDSPL2 (use HardSPL1)

NOTE: If you have Vista or Windows 7, update WMDC to v6.1 *HERE* first
NOTE:
Turn OFF any AntiVirus Program first as it WILL interefere with the flash (there is NO harmful code in the program)

Flashing HardSPL1 via ActiveSync with USB Lead (thanks to Bepe)

IMPORTANT: To install this HSPL1 go into your bootloader and verify your SPL version is 1.42.0000. If it is not then the Installation WILL fail!!

1. Download HardSPL package from *HERE* and extract to an empty folder
2. Synch Phone with PC in Windows Mobile!!! It has to be connected to activesync or WMDC via USB cable
3. Run
HSPL.exe from your pc and read all the text carefully
4. When finished click next
in the HardSPL program
5. The program will now check the usb connection and enter the bootloader screen (tri colour)
6. HardSPL will now be flashed to your phone.
7. When its finished the phone will display a message saying "We hacked it! ".
8. If you see the message on your phone then click "yes" to the question on your pc.
9. Click "ok" to terminate program and reboot the phone.
10. Congrats, you just flashed HardSPL.


Flashing HardSPL2 via ActiveSync with USB Lead
(for people with 512MB ROM LEO's
)

IMPORTANT: To install/uninstall this HSPL2 there must be any SPL version from this list on your device:
SPL 1.42.0000, SPL 1.42.HSPL, SPL 1.62.0000, SPL 1.66.0000, SPL 1.66.HSPL,
SPL 2.07.0000, SPL 2.08.0000 SPL, 2.08.HSPL

1. Download HardSPL package from *HERE* and extract to an empty folder
2. Synch Phone with PC in Windows Mobile!!! It has to be connected to activesync or WMDC via USB cable
3. Run
HSPL2_RUN.exe from your pc and read all the text carefully
4. When finished click next
in the HardSPL program
5. The program will now check the usb connection and enter the bootloader screen (tri colour)
NEW: YOU CAN NOW CHOOSE WHICH VERSION OF SPL OR HARDSPL YOU WANT TO FLASH TO YOUR PHONE!!
6. Select your desired HardSPL and click NEXT.
7. HardSPL will now be flashed to your phone.
8. When its finished the HardSPL program will pop up a box saying "successfully Done".
9. Click ok to terminate program and reboot the phone.
10. Congrats, you just flashed HardSPL.

*Go into BootLoader Mode
(turn off phone, then press and hold the VOLUME DOWN then Press and hold the POWER button. After about 3 seconds the tri-coloured screen should appear). Verify the screen shows SPL-1.42.HSPL, which is the HardSPL version*

--------------------------------------------------------------

To Remove HardSPL from your Device or Flash back a Stock Rom and Stock SPL for Warranty Purposes

You can remove the HSPL by flashing an original SPL from microSD card OR by running the HardSPL2 program (512MB ROM LEO's ONLY) and selecting a Stock SPL to flash.
* You can also use the microSD Card method to flash back your Stock Rom and Stock SPL that you originally had on your phone*

- Download a shipped Rom from *HERE*
- Rename the extension to .zip
- open it with winzip and extract the RUU_signed.nbh file to a folder
- Rename it to LEOIMG.nbh and copy it to the root of a microSD card thats been formatted to FAT32
- Insert your storage card into your phone
- Enter Bootloader and follow onscreen instructions to flash

--------------------------------------------------------------

3. DOWNLOAD AND FLASH YOUR PREFERED ROM

NOTE: Check the Roms Thread for any specific Flashing instructions. If there arent any then you can use the following guide.

Flashing Via ActiveSync
1. Download your prefered Rom from the LEO Rom Develpoment Page and unzip/unrar it to your computer
2. REMOVE SIM and microSD CARDS!! (this is a precautionary measure and is not compulsory)
3. Turn phone back on and wait until it syncs with your PC
4a. If your Rom is a .exe (customRUU.exe is already included in the Rom file) then run the file
4b. If your Rom is a .nbh file then run the CustomRUU.exe
from the Roms Folder (if one isnt included then download it *HERE*)
5
. Follow onscreen instructions to set up your New Rom
6. Once phone has gone through the customisation procedure then replace Sim and microSD Cards
7. Perform a Hard Reset to clear any leftover data from your previous Rom (see intructions at bottom).
8. Set up phone as required and job done.

Flashing Via MicroSD Card

NOTE (PLEASE READ):
If you flash a Stock Rom via microSD Card then it will overwrite your HardSPL with a stock SPL included in the nbh file. If you have a 1024MB ROM HD2 and flash a v2.01 or later Rom (with SPL2.*) you will NOT be able to reinstall HardSPL onto your device and could end up bricking it. This does not apply to custom roms as they do not include an SPL. BE CAREFUL!!

1. Make sure your microSD is Formatted to fat32 (you dont have to delete all files but it is safer if you do)
2. Download your prefered Rom from the LEO Rom Develpoment Page and unzip/unrar it to your PC
3. Goto the Roms Folder and rename the .nbh file to LEOIMG.nbh
4. Copy the LEOIMG.nbh file to the root of your MicroSD Card
5. Plug the MicroSD Card into the phone
6. Reset the device while pressing the volume down button to enter the BootLoader screen, you will first see a tri-color screen with the phone and SPL Information at the top
7. Follow the On Screen instructions to start the update
8. After flash has completed, press the reset button with the stylus to reset the device.

--------------------------------------------------------------

4. FLASH PREFERED RADIO (OPTIONAL)

For more information about compatible Radios go *HERE*

Flashing Via ActiveSync
1. Download your required Radio and rename the extracted file to RUU_Signed.nbh
2. Sync your phone with the PC
3. Run CustomRUU.exe from the Radio's Folder and follow the instructions
(if one isnt included then download it *HERE*)

Flashing via MicroSD Card
Use same method as Flashing a Rom via MicroSD Card

--------------------------------------------------------------

5. JOB DONE. Well Done YOU DID IT!!


Useful Information

How to get into your Bootloader
1. Turn your phone off
2. Press and hold the VOLUME DOWN then Press and hold the POWER button. After about 3 seconds the tri-coloured screen should appear.
3. To exit Bootloader you need to remove your back cover and pull the battery out for a few seconds, then replace it and press the power button to reboot your phone.

How to perform a HardReset
Hard Resetting deletes ALL personal data and settings and restores your phone to factory default conditions as if you turned on the phone for the first time after purchasing.

1. With the device turned off, press and hold the VOLUME UP and VOLUME DOWN buttons, then briefly press the POWER button.
2. Continue pressing the VOLUME UP and VOLUME DOWN buttons until you see this message on the screen:
"This operation will delete all your personal data, and reset all settings to the manufacturer default settings. Press VolUp to restore manufacturer defaults, or press other keys to cancel."
3. Release the VOLUME UP and VOLUME DOWN buttons.
4. Press the VOLUME UP button to perform the hard reset, or press any other button to cancel the reset.

You can also use Clear Storage to reset your device back to factory default settings.
1. On the Home screen, slide to the Settings tab and then tap Menu > All Settings.
2. On the System tab, tap Clear Storage.
3. Enter “1234” and then tap Yes.

Make sure you back up all your data such as Contacts, Appointments, messages etc or they will be gone forever.


*DISCLAIMER*
I take no responsibility for any fault or damage caused by any procedures within this guide. No warranties of any kind are given.

__________________
Phone: HTC HD2 | Rom: Dutty's LEO V2.3 WWE | Radio: 2.07.51.22_2 | SPL: SPL-1.42.HSPL | Twitter:http://twitter.com/mskipxda

My Downloads | Flashing your first LEO Rom (for noobs) | MSkip ProPlus Windows Phone 7 for MS3.5.3
MSkip ProPlus UltimateV2 for MS3.5 | MSkip ProPlus Elegance for MS3.5 | MSkip ProPlus UltimateElegance for MS3.5

CLICK HERE! if you appreciate my work and want to buy me a drink
Last edited by mskip; Today at 07:26 AM..
__________________
If i Helped In Anyway Follow Me On Twitter http://twitter.com/#!/maxtcee
Reply With Quote