[LinearBurn]

what is causing this error?

Executing: platformrebuilder.exe.....
platformrebuilder.exe Executed successfull!!!
done!!!
Wait some seconds...
Executing: kitchen_build_rom.bat.....
Copying OS.nb.payload...
1 file(s) copied.
Implantxip & Payload Resizer v. 1.1 by ervius!!!
XIP: xip.bin not found!
XIP not Inserted!
ImgfsFromNb 2.1rc2
Sector size is 0x800 bytes
ImgFs partition starts at 0x00800000 and ends at 0x00820000
Dumping IMGFS at offset 0x00800000 (size 0x00020000)
Done!
ImgfsFromDump 2.1rc2 TURBO with Prefetching and MultiThreading Support, by Plax
Using compression type 'XPR'!
Sector size is 0x800
Total Sectors: 0x0081
ImgfsToNb 2.1rc2
Using bigstorage mode
Sector size is 0x800 bytes
Writing imgfs to offset byte 0x800000, sector 0x1000
Padding ImgFs from 0x40800 bytes (0x81 sectors)
to 0x60000 bytes (0xc0 sectors)
Not conservative mode. Changing imgfsEnd from 0x820000 to 0x860000
Partition entry before:
File System: 0x25
Start Sector: 0x00001000
Total Sectors: 0x00000040
Boot indicator: 0x00
First Head: 0x00
First Sector: 0x01
First Track: 0x40
Last Head: 0x3f
Last Sector: 0x01
Last Track: 0x40
Partition entry after:
File System: 0x25
Start Sector: 0x00001000
Total Sectors: 0x000000c0
Boot indicator: 0x00
First Head: 0x00
First Sector: 0x01
First Track: 0x40
Last Head: 0x3f
Last Sector: 0x01
Last Track: 0x42
Partition entry before:
File System: 0x04
Start Sector: 0x00001040
Total Sectors: 0x00038fc0
Boot indicator: 0x00
First Head: 0x00
First Sector: 0x01
First Track: 0x41
Last Head: 0x3f
Last Sector: 0x01
Last Track: 0x27f
Partition entry after:
File System: 0x04
Start Sector: 0x000010c0
Total Sectors: 0x00038f40
Boot indicator: 0x00
First Head: 0x00
First Sector: 0x01
First Track: 0x43
Last Head: 0x3f
Last Sector: 0x01
Last Track: 0x27f
ImgFs Flash Region log blocks was 0x1, now is 0x3
Storage Flash Region log block was 0xffffffff, now is 0xffffffff,
Done!
NBMerge 2.1rc2
Executing ..\TOOLS\IMGFS\NBMerge with data chunk size = 0x800 and extra chunk size = 0x8
on file OS-new.nb
Partition 0: start sector: 0x00000002, total: 0x0000063e
first used: 0x00000002, used: 0x00000600
Partition 1: start sector: 0x00000640, total: 0x000009c0
first used: 0x00000640, used: 0x0000083c
Partition 2: start sector: 0x00001000, total: 0x000000c0
first used: 0x00001000, used: 0x00000081
Checking OS-new.nb for bad NAND block marker
Checked 0x10c0 sectors successfully!
Done.
executing NBHUtils to build nbh file...
Volume in drive C has no label.
Volume Serial Number is 7849-0729
Directory of C:\Users\Desktop\Desktop\Calkulins WVGA Kitchen v1.6 R3\Calkulin's WVGA Kitchen v1.6 R3\Release_Touch_Pro2
03/19/2010 04:50 AM 8,835,295 RUU_signed.nbh
1 File(s) 8,835,295 bytes
0 Dir(s) 11,745,558,528 bytes free
Done!!!
kitchen_build_rom.bat Executed successfull!!!

Far as i can tell its not inserting a file some were but can not fix it