[spidrweb]

Originally Posted by theponce

It works f ine for me. I can send and recieve MMS just fine.

Follow the instructions listed in the links earlier.

- Here is what I did to get it to work -

use your regedit -

HKLM>system>inbox>externalaccounts> rename "SMS" to SMS.htc

install arcsoft > soft reset.

Link to the download here
---------------------------
( http ://forum.ppcgeeks.com/attachment.php?attachmentid=51951&d=1260593344 )
---------------------------

after you've isntalled the cab - open the native MMS SETTINGS and change them to match the ones below ( I only changed the CDMA settings but.. i suppose one could change them both)

This is likely not the most practical way of getting to these settings but it will at least guide you to where they are..

Widnows Key > E-mail>SMS/MMS>Menu(bottom right)>Scroll Down & Select "Pics/Video Options"

From here select - CDMA Servers and fill in the blanks.

port: 80
http ://mms.sprintpcs.com/servlets/mms
connect via sprint

You will notice that the "Send limit" is by default 5000k (I'll show you were to change this at the bottom)

Now that that part is done.. now to remove the HTC Messaging.
Download the cab to remove it below
---------------------------------
Zenyee Disable HTC Messaging 1.2.CAB

http ://forum.ppcgeeks.com/attachment.php?attachmentid=53802&d=1262144635
---------------------------------

Install this cab and your'e another step closer =-)


Now , to change the Send Limit - Why?
- Most carriers will only allow you to receive up to a ~1mb roughly unless changed. But since it is by default ~1mb across the board, we'll stick to that.

One thing to also note, is that by default the Arc-MMS automatically sets the
RecieveLimit to 300kb (Yeah, right.. who sends thumbs any more? >.< ) So yet another reason we'll have to change these limits.

Start your registry editor and follow this string below to the values that need to be changed.

HKEY_LOCAL_MACHINE > SOFTWARE > Arcsoft > ArcSoft MMS UA > Config > mm1 > MMSCSetting > SampleMMSC2

And here change the values for WAP2RecvDefaultSize to ~1mb (dont forget to submit the value as a decimal and not a hex value =-) )
I went ahead and just kept mine to "5120000" for both send and recieve for both WAP2SendDefaultSize / WAP2RecvDefaultSize

---
This should cover it - in between the cab installs it takes your phone a while to reset up, so incase it looks like you've crashed your phone, just let it sit for a while. (I actually did soft reset my phone once after isntalling the HTC messaging removal cab , but it started up and worked jsut fine.

GRats and enjoy this somewhat rigged up MMS Fix. hehe.

- ThePonce

PS. - I didn't do much more then just figured out how to make this already existing fix work with this rom and found were I needed to change the settings at. Credit is due where it is deserved - and that is 2K4MACH ( http ://forum.ppcgeeks.com/showpost.php?p=1406931&postcount=65)

ima flash and try this out the very second i can!!! THANK YOU... ill keep you updated with the results!