Thread: Can't get serial connection in bootloader mode
View Single Post
  #5 (permalink)  
Old 11-15-2009, 04:16 PM
santod's Avatar
santod
"MODS"
Offline
Location: NorCal
  
Join Date: Sep 2008
Posts: 3,984
Reputation: 22765
santod can't get a higher reputation levelsantod can't get a higher reputation levelsantod can't get a higher reputation levelsantod can't get a higher reputation levelsantod can't get a higher reputation levelsantod can't get a higher reputation levelsantod can't get a higher reputation levelsantod can't get a higher reputation levelsantod can't get a higher reputation levelsantod can't get a higher reputation levelsantod can't get a higher reputation level
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Re: Can't get serial connection in bootloader mode
Bootloader is different then Diag mode. Bootloader will not work.

If the ##3424 or ##3424# codes don't work for you, try going to the Windows directory, locate LaunchDMRouter, and tap it to start Diag. mode.

You must put the phone in Diagnostics mode, then:


Check your device manager to see which port the HTC modem is actually on.

Then go into QPST Configuration and add new port, select the one you just found it to be on in device manager.

Then you should be able to open QPST Service Programming and change your MSL.

If you need further assistance, let me know.
__________________

~My Ultimate WVGA Wallpapers Collection~
Donations accepted not expected!


Last edited by santod; 11-15-2009 at 04:34 PM.
Reply With Quote