[marcus_cruz]

Ok dude, If I am going to try to help you, you have to think clearly on this, and also know the difference between power and send.

Prior to doing this,
get your phone into bootloader mode. Actually for all flashing steps your phone must be in Tri-Color Boot Mode. Google HARD-SPL and you will see what it should look like.

If you phone will not go into boot loader mode, try to use the same method's that are used for phone that correlate to the HSPL
you flashed to. So if you flashed a VZW HSPL, then use the bootloader method for that phone.

1) Dowload and extract through WinRAR the Verizon TP2 Stock ROM Shipped.
2) Remove the RUU_signed.nbh from the extracted directory, and place it somewhere else on your PC for now.
3) Rename the the SPL_signed.nbh to RUU_signed.nbh and then run the ROMUpdateUtility.
4) Ensure it flashes.
If it was successful, let your phone reboot, it will still not start up correctly so pull the battery out and get it into bootloader mode again.
If successful then.
Rename the existing RUU_signed.nbh to it's old name of SPL_signed.nbh.
Now copy the RUU_signed.nbh to the directory you extracted the shipped ROM to.
It will be the larger .nbh
Now with the phone in bootloader mode, Tri-Color screen, try to run the ROMUpdateUtility again, but this time it will be flashing the
OS to the phone. It will pause significantly on 12%, just let it run. If 30 minutes elapses, it's failed.
Try again.
Let the phone reboot.
You should be good to go.

Edit:If none of this works, you may want to try running the SPL Relocker for the phone that correlates to the HSPL you accidentally flashed to. What can it hurt ? Your phone is already messed yup. Then try these steps again.